Resources

Store Info

Manufacturers

Best sellers

Calibration Test Equipment

Several standards such as an ANSI C63.16 require ESD simulator calibration, specifying test equipment. Measuring high voltage static electricity is a simple and generally hazardous free task that can be performed in most test laboratories performing electrostatic discharge and immunity testing. Self calibrate or verify your ESD guns, generators,...

Several standards such as an ANSI C63.16 require ESD simulator calibration, specifying test equipment. Measuring high voltage static electricity is a simple and generally hazardous free task that can be performed in most test laboratories performing electrostatic discharge and immunity testing. Self calibrate or verify your ESD guns, generators, pistols and tips with calibration test equipment offered by ESDGuns.com.

More

Calibration Test Equipment There are 25 products.

Subcategories

  • ESD Calibration Test Targets

    Coaxial calibration targets for measuring, testing and calibrating the ESD pulse from your electrostatic discharge gun. Target, 20 dB attenuator and RF coaxial cable offered seperately or as calibrated systems to ensure accurate test results. ESDGuns.com representatives will help set up your complete measuring path from the target to the attenuator up to the high quality coax cable.

  • Electrostatic Voltmeters

    Verify the voltage coming from the tip of your ESD pistols with an electrostatic voltmeter. These high-impedance, high voltage measuring instruments are used in ESD simulator verification and calibration. The new ESVM digital meter has high accuracy to 1 Volt and is ideal for meeting compliance standards IEC 61000-4-2, ISO 10605 and more.

  • Oscilloscopes for ESD Calibration

    High speed oscilloscopes for verification and calibration the waveforms generated by your ESD simulator.

  • Calibration Setup Accessories

    Rent, buy or lease ESD simulator calibration test equipment. ESDGuns.com is a global supplier of electrostatic immunity compliance equipment to meet IEC 61000-4-2, ANSI C63.16 and more.

  • ESD Calibration & Repair Services

    Process a calibration or repair request online, receive an RMA form and send your unit. A few short steps to get this task underway, rentals available to minimize downtime. ESDguns.com can repair and calibrate ESD generators from most manufacturers including but not limited to Teseq, EM Test, Keytek, Haefely, Noiseken and 3ctest.

per page
Showing 1 - 10 of 25 items
    • Accredited ISO 17025 Calibration Available
    • High input impedance - 100 GOhm
    • Wide measurement range
    • High accuracy and resolution
    • Stable reading
    • Portable with large LCD/LED
    • Battery or AC supply
    • Measure DC and AC voltage up to 200KHz
    • Suitable for use for IEC 61000-4-2ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
    Special Order
    Request Quote/More Info
    • Complete solution for ESD Generator verification (oscilloscope required)
      • 4 GHz ESD Current Target Chain with Calibration
      • High-voltage meter rated to 100kV
      • Vertical calibration plane for coaxial current target
      • 2 GHz Digital Storage Oscilloscope
    Typically In Stock
    Request Quote/More Info
  • Quick view
    $3,450.00 New
    • Rental ESD Targets with ISO 17025 Accredited Calibration Available
    • Meets MIL-STD-461G CS118 as well as IEC 61000-4-2 and most every other ESD test standard
    • Input Resistance 2.08 Ohm (±1%) (2.00 Ohm when match with 50 Ohm load)
    • Wideband up to 4GHz
    • 0.5A/V transfer impedance, ±1% (with a 20dB attenuator, 5A/V)
    • Voltage Non-linearity <2% up to 20kV, < 5% up to ± 30kV
    $3,450.00
    In Stock
    Request Quote/More Info
  • Quick view
    $4,925.00 New
    • Economical and Portable Option for ESD generator calibration 
    • Ideal for replicating full test procedure during precompliance evaluation
    • Minimal setup required
    • 1 GHz - 2 GHz Oscilloscopes add-on available
    $4,925.00
    Typically In Stock: Ships 2 - 5 Days
    Request Quote/More Info
  • Request Quote/More Info
    • 4½ digit LCD display.
    • High input resistance (10GΩ).
    • Up to 40kV or 60kV direct measuring
    • Battery operation for portable use (9V).
    • Display is Voltage Co-efficient compensated
    • Recorder output for monitoring.
    • 40kV models supplied with hand held probe.
    • Rugged construction.
    Typically In Stock
    Request Quote/More Info
    • Analog Channels: 4 + EXT
    • Bandwidth (-3dB) @ 50 Ω: 2GHz *1
    • Rise time@ 50Ω: 230 ps
    • Sample Rates: 5 GSa/s (10 GSa/s ESR) @ each channel
    • 10 Megasample Record Length on All Channels
    • Waveform Capture Rate: Normal mode: 170,000 wfm/s; Sequence mode: 750,000 wfm/s
    Typically In Stock
    Request Quote/More Info
    • Industrial strength wheels and mounted handles allow for easy placement
    • Pre drilled holes for easy installation of any ESD target
    $1,975.00
    In Stock
    Request Quote/More Info
    • 2.5 GHz Bandwidth
    • Up to 20 GS/s Real-time Sample Rate
    • Suitable for all ESD immunity compliance standards requiring ESD generator verification
    Request Quote/More Info
  • Calibration adapter set to MD 103. To calibrate MD 103 per specifications of IEC 61000-4-2 (2008) and ISO 10605 (2008)

    Typically In Stock
    Request Quote/More Info
Showing 1 - 10 of 25 items