100pF/1500Ohm (Human Body Model - HBM)

The Teseq (Schaffner) INA 4561 Discharge Network 100 pF / 1500 Ohm per MIL-STD 883 for NSG 437/438 is compatible with the Teseq NSG 438 ESD Simulator Gun. Specifications: Capacitance: 100 pF Resistance: 1500 Ohm Used to test ESD per MIL-STD-883 Compatible with Teseq NSG 437 and NSG 438 Models

Read more less

The Haefely 4700622 RC Network 100pF/1500 Ohm for MIL-STD-883 / GR78-CORE Human Body Model (HBM) is for use only with the Haefely ONYX 16 kV or Haefely ONYX 30 kV Specifications: Capacitance: 100 pF Resistance: 1500 Ohms Test Standards Met: MIL-STD-883 GR78-CORE

Read more less

The EMC Partner DM6 150pF / 330ohm RC module is required for use with the for EMC Partner ESD 3000 Pistol. The plug-in module meets human body model compliance standards IEC 61340-3-1, JEDEC 22-A114 and Mil-STD-750D. The discharge modules (DM) contain the high voltage source and the impulse network, making them optimized for the specific application and standard. The RC modules can be easily interchanged. EMC Partner ESD3000DM6 Features: Standards Met: IEC 61340-3-1 JEDEC 22-A114 Mil-STD-750D Capacitance/Resistance: 100pF / 1500ohm Voltage range (CD) Contact Discharge: +/- 0.2kV up to 8kV Voltage range (AD) Air Discharge: None

Read more less

The 3M 753 HBM/MM ESD Simulator allows you to simulate electrostatic discharge events at precisely controlled output voltages. It was primarily designed as a tool for determining application trigger voltages of 3M 751 Static Event Detectors. However, it is a suitable tool for any Human Body Model and Machine Model ESD testing and debugging before going for compliance to MIL-STD-883 or JEDEC 22 A115, A115 or other HBM/MM ESD immunity standards. The ESD simulators is supplied with two color-coded snap-in discharge network assemblies, allowing users to quickly select the discharge model and polarity. The battery operated unit is light and portable, with several additional accessories provided allowing users to setup and test easily. 3M 754 HBM/MM ESD Simulator Features: Discharge Models: Human Body Model (HBM): Capacitance: 100 pF ±10% Resistance: 1500 Ohms ±1% Machine Model (MM): Capacitance = 200 pF ±10% No Resistor Output Voltage: 15 to 5,000 V Display Resolution: 1 V at or under 800 V 10 V at or above 1000 V Display Accuracy: 3% of total reading Stability: 1% after 10 minutes of settling

Read more less

The Teseq (Schaffner) INA 4591 Discharge Network 250 pF / 500 Ohm for NSG 437/438 is compatible with the Teseq NSG 438 ESD Simulator Gun. Specifications: Capacitance: 250 pF Resistance: 500 Ohm Compatible with Teseq NSG 437 and NSG 438 Models

Read more less

The ESD30-HBM is an easy-to-use electrostatic discharge generator tailored for human body model ESD standards MIL-STD-750D, JS-001-2017, IEC 61340-3-1, JEDEC 22-A114, and more. With a straightforward interface, compact package, and low cost, the ESD30-HBM has been accepted by compliance laboratories and component-level test engineers. By disconnecting the HBM module from the tip of the ESD generator, standard system level testing can be accomplished to IEC 61000-4-2, MIL-STD 461G CS118, DO-160 Section 25, and many more. With a level of configurations, the ESD30-HBM can be built for all-day, everyday use to occasional use, while being budget-friendly. The EMC Shop, sister to ESDguns.com, has advanced knowledge and understanding of electrostatic discharge applications and serves as a resource before and after purchase. ESD30-HBM Human Body Model ESD Package Includes: ESD Generator with connection cable  Desktop control unit with mains cable Capacitor module 100 pF Resistor module 1500 Ohm   HBM Module Contact discharge test tip Air discharge test tip Discharge return cable, 2 m Manual   Carrying Case Traceable Calibration Certificate (Accredited Available) 10% off Calibration Service for Life

Read more less

Noiseken 100pF-1.5k Ohm CR network for GT-30R / 06-00079B

Read more less