Noiseken ESD Simulators

The Noiseken ESS-2000 simulator is a popular among car manufacturers such as Honda and Toyota for ISO 10605 ESD Testing. The ESS-2000 provides four operation modes, allowing the operator to conduct a single step testing for the IEC specified test voltages and for a series of stored test settings. Noiseken ESS-2000 Features: Meets and far exceeds the requirements in EN/IEC61000-4-2 Up to 30kV output in both contact and air discharges A light weight discharge gun Easily changeable capacitor and resistor units A wide range of options CE marked Controllable from an external computer using various communication interfaces.

Read more less

The Noiseken ESS-L1611 16 kV Electrostatic Discharge Simulator for IEC 61000-4-2 is a cost-oriented basic model ESD Simulator with a light weight discharge gun pistol attachable.  The Noiseken GT-30R discharge gun has been renewed completely to materialize much more lightning and best gravity balance. Human load in the operation can be remarkably reduced comparing to the previous model. Electrostatic discharge can be confirmed with LED light on the body in this new discharge gun.

Read more less

The Noiseken ESS-S3011 30kV ESD simulator system is the most advanced ESD immunity test solution on the market. Noiseken ESS-S3011 Features: “Pre-checking function” taking the confirmable test into the account “Discharge Detecting Function” to realize the air-discharge confirmation. “Lightest Discharge Gun in the market” to lighten the continual operation White LED Irradiator to facilitate the visualization of the discharging area. One-touch exchange of gun head and CR unit realized

Read more less

The EMC Shop has an assortment of Noiseken Resistance/Capacitance combinations available as a lot. Inquire for pricing.

Read more less

Noiseken 100pF-1.5k Ohm CR network for GT-30R / 06-00079B

Read more less

Connected to the ESD simulator main unit, the Automatic ESD Eliminator automatically removes residual charges on the EUT.  A control signal from the ESD simulator turns on the switch of the eliminator to drain away the residual charges on the EUT to the ground.  Two operation modes are provided: turn-on after each discharge and turn-on after preset number of discharges (Not compliant with the standard). Available Models: ESS-2000, ESS-2000AX, ESS-S3011 

Read more less

The Noiseken ESS-200AX 30kV ESD electrostatic simulator was a very popular unit but has been discontinued by the manufacturer.  Current models are the ESS-B3011 and ESS-S3011. The ESS-200AX is still suitable for precompliance testing to IEC/EN 61000-4-2 or general test and debugging for ESD immunity. Noiseken ESS-200AX Features: 0.20 - 30kV Output Voltage Discharge Interval Programmable from 0.05 to 600 seconds Pre programmed IEC Severity Levels Storage functionality in Manual, Sweep and Program Mode

Read more less

The NoiseKen ESS-6002 Component Level Electrostatic Discharge Simulator is a tester specifically designed to carry out ESD sensitivity testing of semiconductor devices to standards such as MIL-STD-883, EIAJ ED-4701 and others. Included are the Human Body Model (HBM) and Machine Model (MM) probes.  As a DUT interface, select either Free Type Probe Stand where virtually any package type can be connected by means of a pair of miniature test leads or Semi-automatic Precision Type Probe Stand providing automatic and precise pin-to-pin feeding with a minimum 0.01mm resolution. Meets Human Body Model (HBM) Compliance Standards: AEC-Q100-002-Rev.D Jul.2003 ESDA ANSI/EOS/ESD-STM5.1-2001 IEC 61340-3-1Ed.1.0 2002 IEC 60749-26 Ed.1.0 2003 JEDEC JESD22-A114E Jan 2007 JEITA EIAJ ED-4701/300 Aug.2001 Test Method304 MIL-STD-883G Method 3015.7 Mar.1989 Meets Machine Model (MM) Compliance Standards: AEC-Q100-003-REV-E  Jul.2003 ESDA ANSI/ESD STM5.2-1999 IEC 61340-3-2 Ed.1.0-2002 IEC 60749-27 Ed.1.0 2003 JEDEC JESD22-A115A Oct.1997 JEITA EIAJ ED-4701/300 Aug.2001 NoiseKen ESS-6002 Features: 10V minimum output (1V step) A simple probe stand and test fixture plus a pair of miniature test leads meeting many different kinds of device packages <Free Board Type> Narrow pitch DUT can be tested in semi-automatic manner <Semi-automatic Precision Type> Each probe has a coaxial interface with an external measuring instrument. External trigger input and output terminals are provided.

Read more less

The Noiseken ESS-B3011 & GT-30R ESD test equipment is a cost-oriented basic model ESD Simulator with a light weight discharge gun pistol attachable. The 30 kV output voltage makes this unit suitable for EN/IEC61000-4-2 and the ISO 10605 standard. The Noiseken GT-30R discharge gun has been renewed completely to materialize much more lightning and best gravity balance. Human load in the operation can be remarkably reduced comparing to the previous model. Electrostatic discharge can be confirmed with LED light on the body in this new discharge gun. Noiseken ESS-B3011 & GT-30R Features: “Pre-checking function” taking the confirmable test into the account “Discharge Detecting Function” to realize the air-discharge confirmation. “Lightest Discharge Gun in the market” to lighten the continual operation White LED Irradiator to facilitate the visualization of the discharging area. One-touch exchange of gun head and CR unit realized

Read more less