Products

Teseq NSG 439 ESD Simulator for Robotic Applications

Teseq ESD Guns Teseq NSG 439 ESD Simulator

In Stock

Today’s growing trend towards miniaturizing and more comprehensive product standards means that ESD testing is now required not only for operating controls, but also for any associated peripheral devices such as sensors, actuators and controllers. Many of these devices have multi-pin connectors with high pin counts. In order to meet space restrictions, these pins are often arranged close together.However, conventional air-discharge testing of these closely spaced pins is problematic because the airdischarge arc may jump to an adjacent pin instead of the pin intended for test. With an innovative robotic air-discharge adapter accessory, Teseq provides a tool which will prevent unintentional discharge paths. Furthermore, the approach speed, which is crucial for reliable air-discharge testing, can be programmed as a constant.ESD testing of connectors often requires that each individual pin is tested for an extensive range of conditions including multiple discharges, polarities, voltage settings, and even R/C networks. Connector testing can take many hours or even days of monotonous, precise effort to complete. As a result, when this testing is done manually it is prone to errors. The advantage of robotic testing is that these procedures can be automated and precisely executed, ensuring a level of repeatability that cannot be achieved with manual testing. Teseq NSG 439 Features: Air- and contact-discharge to 30 kV Battery tested to 30’000 discharges at 30 kV Standard Discharge Networks for IEC 61000-4-2, RTCA/DO-160 and Mil-STD-461G CS 118 Custom Discharge Networks for ISO 10605 Touch panel control Advanced voltage-hold feature Activity log Compliant with a huge range of OEM and international standards Built-in ISO self-calibration procedure Easily and quickly interchangeable discharge networks Selectable discharge detector

Read more less

In Stock

$0.00

Keytek Minizap MZ-15/EC 15kV ESD Simulator Gun

Thermo Keytek Thermo KeyTek MZ-30 Minizap ESD Simulator up to 30kV

In Stock

The test voltage levels of the MZ-30 are more than sufficient for compliance to required IEC standard level 4 (15 kV) levels. Essentially a design tool, it allows you to identify the conditions where your product begins to degrade or malfunction (limit value), prior to production, and thus is also ideal for testing to category- or companydriven quality standards. The operation panel has keys and a rotary knob, which allow you to directly set test levels specified by the IEC standard. These controls facilitate adjustment for standardcompliance tests and other various settings. In addition to the standard 150 pF capacitor unit and 330O discharge resistor, a variety of optional components are available including a 330 pF capacitor unit and 2kO discharge resistor. The MZ-30 also supports the seven discharge current waveforms prescribed for the waveform calibration method laid down in a target compliant with IEC61000-4-2 Editions 1. In addition, it was designed to suppress waveform ringing to improve waveform quality. The MZ-30 also supports the seven discharge current waveforms prescribed for the waveform calibration method laid down in a target compliant with IEC61000-4-2 Editions 1. In addition, it was designed to suppress waveform ringing to improve waveform quality. Keytek Minizap MZ-30 Features: Intuitive operation Portable & self-contained Meets exact requirements of IEC 61000-4-2 Contact mode & air discharge ESD testing Generates real world, repeatable & correlatable ESD pulses E & H Field diagnostics Built-in safety features Field-configurable AC powered

Read more less

In Stock

$8,900.00

ESD Immunity testing example with the Keytek MZ-15 ESD Gun

Thermo Keytek Thermo Keytek TPC-2A Contact Tip for Minizap Simulator, 0.7-1 ns Rise Time

In Stock

The Keytek TPC-2A contact discharge tip is the most recent generation tip used with the Keytek Minizap MZ-15 and MZ-15/EC ESD simulators, compliant to IEC 61000-4-2, edition 2 and 3. ESDguns.com stocks replacement tips for easy ordering and replacement.

Read more less

In Stock

$1,850.00

Measurement Accuracy Trek 884 Electrostatic Voltmeter

Trek Trek 884 Non-Contacting Electrostatic Voltmeter

In Stock

The Trek 884 (±20kV) Hand-Held Electrostatic Voltmeters provide accurate, noncontacting measurements of electrostatic surface voltage for ESD applications in either ionized or non-ionized environments. The Trek 884 voltmeters utilize a measurement technique that overcomes the disadvantage of the typical hand-held field-meter by providing surface voltage measurements which are essentially independent of the sensor probe-to-measured surface spacing. Trek 884 Applications: Measurement of electrostatic surface charge build up Manufacturing processes Electronic assembly testing Semiconductor material testing Dissipative material testing Automotive electronics testing ESD Auditing and troubleshooting

Read more less

In Stock

$299.00

Thermo Keytek Used Keytek (Thermo Fisher) Minizap MZ-15-EC 15kV ESD Simulator Gun

In Stock

For descriptions, videos and more visit the Rent Thermo Keytek Minizap MZ-15/EC web page. Right now, ESDguns.com has an excess inventory of rental units and has allocated this unit for sale. Used Keytek Minizap MZ-15/EC Features: Recently rebuilt internal battery Fresh NIST Calibration Certificate Industry best 100 Day warranty Ships Immediately Rent Keytek Minizap ESD Simulators here. TPC-2A and TPA-2 Included Standard - additional tip and accessories available Thermo Keytek Minizap Video Overview

Read more less

In Stock

$7,500.00

Rent VCP Vertical Coupling Plane for Indirect ESD Testing

ESDGuns.com VCP Vertical Coupling Plane for Indirect ESD Testing

In Stock

Utilize the vertical coupling plane with any ESD generator, setup in seconds on any lab bench and begin testing immediately. The indirect radiated portion of electrostatic immunity testing is required for compliance. If your product will be used in metal cabinets, next to industrial machinery or even on top of the metal counters at your corner supermarket, electric shock may cause radiated interference. VCP Vertical Coupling Plane consists of: VCP Aluminum 20" by 20" Wood Stand Ground Cable with 470k Ohm resistors for voltage bleeding

Read more less

In Stock

$675.00

ESDGuns.com VCP-FS Floor Standing Vertical Coupling Plane with Voltage Bleeding Cable

In Stock

VCP-FS Floor Standing Vertical Coupling Plane consists of: VCP Aluminum 20" by 20" (Larger sizes available upon request) Wood Stand with casters Vertical post with multiple height positions Ground Cable with 470k Ohm resistors for voltage bleeding

Read more less

In Stock

$1,475.00

Handles & Calibration Guides Installed on VGP

ESDGuns.com VGP Mobile Vertical Ground Plane Setup for ESD Current Target

In Stock

Not compliant to edition 3, contact us for retrofit guidance, it still can be used with a tripod to get data pretty close to the fully compliant setup. Mount your ESD current target in a high quality, mobile vertical ground plane. The VGP Mobile has locking wheels allowing for easy mobility and placement during waveform verification of ESD generators.

Read more less

In Stock

$1,975.00

Completely non-conducted wood table made in the USA

ESDGuns.com Wood Table in Accordance to IEC 61000-4-2

In Stock

The complete ESD Test Setup includes a built in horizontal coupling plane with access points for the indirect portion of the test. This standard wood table removes the horizontal plane and leaving a standard wood top, allowing for multi-purpose use with other test standards. Custom sizes and other modifications are available upon request. IEC/EN 61000-4-2 Non-Conductive Wood Table Overview Wood Table made of High quality wood (Typically Lauan) Reinforced for sturdiness and weight load up to 750 pounds Typical Dims 160 cm x 80 cm x 80 cm Approximate 110 lbs

Read more less

In Stock

$1,775.00

View options