Resources

Store Info

Manufacturers

Viewed products

Best sellers

ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

New

  • Accredited ISO 17025 Calibration Available
  • High input impedance - 100 GOhm
  • Wide measurement range
  • High accuracy and resolution
  • Stable reading
  • Portable with large LCD/LED
  • Battery or AC supply
  • Measure DC and AC voltage up to 200KHz
  • Suitable for use for IEC 61000-4-2ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

More details

  • New
  • Used / Refurbished
  • Rental - 1 Month

Special Order

Request Quote/More Info

Data sheet

Air Discharge Voltage± 1V ~ 100 kV (± 1% ± 2 counts)
Voltage Resolution1 Volt up to 20kV, 10 Volts Over 20kV
Display4 ½ large LCD/LED
Standards MetANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
Dimensions20×15×50 cm (7.85×5.91×19.68 inch)
Weight2 kg (4.41 lb)
Input/Shunt Resistance100 GOhm

More info

The ESVM High-impedance High-voltage Meter for ESD Gun Charge Voltage Verification is a compact, cost effetive solution to verify the electrostratic discharge produced by simulators, guns pistols and generators. The ESVM High-impedance High-voltage Meter has a Measurement range: ± 1V ~ 100kV(customization), Accuracy: ± 1% ± 2 counts, Input impedance: ≥ 10 GΩ (customizable, like 30GΩ, 100GΩ), Display: 4 1/2 large LCD, Resolution: 1V.

ESVM Includes:

ESVM Applications:

  • Electrostatic voltage measurement
  • ESD generator/simulator calibration
  • Electrostatic voltmeter calibration
  • High-impedance high-voltage measurement
  • Suitable for use for ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

ESVM Specifications:

  • Range: ± 1V ~ 100 kV (customizable)
  • Accuracy: ± 1% ± 2 counts
  • Input impedance: 100 G ohm
  • Display: 4 ½ large LCD/LED
  • Resolution: 1V
  • 20×15×50 cm (7.85×5.91×19.68 inch)
  • 2 kg (4.41 lb) 

Accessories

10 other products in the same category: