Store Info

Resources

Manufacturers

Specials

Viewed products

Best sellers

EMC Partner ESD3000 Handheld, Electrostatic Discharge (ESD) Tester

Refurbished

  • Rentals supplied with ESD3000DM1 module for standard IEC testing
  • Very high accuracy and pulse repetition
  • High Quality / Rugged Design
  • Most Modular System Available
  • Upgrade over time from 16kV to 30kV
  • Additional Discharge Networks Available For Rent (Inquire)

More details

$895.00 + Shipping

  • Rental - 1 Month

Typically In Stock

Request Quote/More Info

Data sheet

Air Discharge Voltage16 kV or 30 kV, depending on modules chosen
Contact Discharge Voltage16 kV or 30 kV, depending on modules chosen
Voltage Resolution100 V
Radiation RatingII (16kV) IIII (30kV)
Discharge tipscontact discharge (CD) and air discharge (AD)
Pulse networksSelectable
Discharge detection (air-discharge only)selectable, count pulses or count discharges
Holding timeGreater than 5 Seconds
Polaritypositive, negative, alternating
Operating modescontact discharge (CD) and air discharge (AD)
DisplayLCD and 6 menu buttons, 1 trigger button
Discharge Repetition20 Hz (pulse every 0.05, 0.1, 0.2 to 99 s) - 30 Hz air mode
Discharge Counterpre-selectable, 1 to 29999
Battery Life8 Hours
Dimensions 340 x 130 x 70 mm
Weight2.2 Lbs

More info

The EMC Partner ESD 3000 is a fully automated and programmable ESD simulator. It identifies which discharge module is installed and has a level selector button enabling the user to quickly scroll through and select the voltage from the levels appropriate to the standard and discharge mode.

The set pulse count is executed with a single pull of the trigger in either air or direct contact mode. Polarity can be programmed to alternate or can be changed with the push of the +/- button at any time. Voltage can be programmed to ramp up or down or quickly changed at any time by using the up and down arrow buttons.

EMC Partner ESD3000 Features:

  • Very high accuracy and pulse repetition
  • High Quality / Rugged Design
  • Most Modular System Available
  • Upgrade over time from 16kV to 30kV
  • Discharge Networks to meet standards:
    • International IEC 61000-4-2, IEC 61340-3
    • Automotive ISO TR10605, GMW 3100
    • Avionics RTCA / DO-160
    • Military Mil-STD-464, Mil-STD-883, Mil-STD-1576

Discharge Modules for EMC Partner ESD3000:

  • DM1 for IEC 61000-4-2,ITU-T K20: 150pF / 330ohm +/- 0.2kV up to 10kV +/- 0.2kV up to 16kV
  • DM2 for ISO TR10605, PSA Peugeot-Citroën B21 7110: 330pF / 2000ohm +/- 0.2kV up to 10kV +/- 0.2kV up to 16kV
  • DM4 MIL-STD-883, GR78-CORE: 100pF / 1500ohm +/- 0.2kV up to 10kV +/- 0.2kV up to 16kV
  • DM5 for RTCA/DO-160: 150pF / 330ohm no CD +/-1kV up to 30kV
  • DM6 for IEC 61340-3-1, JEDEC 22-A114, MIL-STD-750D: 100pF / 1500ohm +/- 0.2kV up to 8kV no AD
  • DM7 for IEC 61340-3-2, JEDEC 22-A115: 200pF / 0ohm +/- 0.1kV up to 2kV no AD
    DM8 for IEC 60571, EN 50155: rise time < 0.05µs duration 0.1µs +/- 0.2kV up to 10kV +/- 0.2kV up to 16kV
  • RM32 0.7ns up to 1ns and < 400ps: +/- 1kV up to 30kV +/- 1kV up to 30kV
  • DN1 for IEC 61000-4-2, RTCA/DO-160, PSA Peugeot-Citroën B21 7110, GMW 3100: 150pF / 330ohm +/- 1kV up to 30kV +/- 1kV up to 30kV
  • DN2 for ISO TR10605, SAEJSSI-IS, FORD AB/AC, GMW 3097: 330pF / 2000ohm +/- 1kV up to 30kV +/- 1kV up to 30kV
  • DN3 for ISO TR10605, SAEJSSI-IS, FORD AB/AC, GMW 3097: 150pF / 2000ohm +/- 1kV up to 30kV +/- 1kV up to 30kV
  • DN4 for STANAG 4239, ISO 14304, MIL-STD-1512: 500pF / 5000ohm +/- 1kV up to 30kV +/- 1kV up to 30kV
  • DN5 for MIL-STD-331C, MIL-DTL-23659D, STANAG 4239: 500pF / 500ohm +/- 2kV up to 30kV +/- 2kV up to 30kV
  • DN6 for ISO TR10605: 330pF / 330ohm +/- 2kV up to 30kV +/- 2kV up to 30kV

Accessories

9 other products in the same category: