Rohde & Schwarz RTE1202 Digital Oscilloscope 2 GHz, 4 channels

    Description

    • One million waveforms/s 
    • Very low inherent noise of 100 µV at 1 mV/div and 1 GHz 
    • Full measurement bandwidth up to 2 GHz, even at 500 µV/div 
    • Up to 16-bit vertical resolution ❙ Memory up to 200 Msample 
    • Minimal trigger jitter < 1 ps 
    • Trigger hysteresis can be adjusted to signal quality

    The R&S®RTE was developed with the objective of minimizing noise, from matched BNC-compatible inputs with 18 GHz bandwidth to high-precision A/D converters and extremely low-noise frontends. At 1 GHz bandwidth and 1 mV/div input sensitivity, the R&S®RTE oscilloscopes have a very low RMS noise of 100 µV, allowing precise measurements even at the smallest vertical resolutions.

    Product form

    In Stock  In Stock
    Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

    Request Lead Time
    Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

    International
    Depending on where you’re located, we offer next day delivery. Check your status on this link

    $0.00 + Shipping

        Features

      •    Built in ESD Software for compliance and calibration
      • Highest sampling rate of 5 Gsample/s and deepest memory of 200 Msample for accurate acquisition of long signal sequences
      •    Acquisition rate of more than one million waveforms/s for finding signal faults quickly
      •    Extremely low-noise frontends and 16-bit vertical resolution in high definition mode for precise results

      Features

      Ask & Learn

      Previous answers and questions posted below

      Learn by asking questions, practicing, and getting guidance

      Ask Now

      Description

      • One million waveforms/s 
      • Very low inherent noise of 100 µV at 1 mV/div and 1 GHz 
      • Full measurement bandwidth up to 2 GHz, even at 500 µV/div 
      • Up to 16-bit vertical resolution ❙ Memory up to 200 Msample 
      • Minimal trigger jitter < 1 ps 
      • Trigger hysteresis can be adjusted to signal quality

      The R&S®RTE was developed with the objective of minimizing noise, from matched BNC-compatible inputs with 18 GHz bandwidth to high-precision A/D converters and extremely low-noise frontends. At 1 GHz bandwidth and 1 mV/div input sensitivity, the R&S®RTE oscilloscopes have a very low RMS noise of 100 µV, allowing precise measurements even at the smallest vertical resolutions.

      Featured products

      Equipment often ordered with ESD guns.

      • ESD Generator Verification & Calibration Equipment Package

        View options

        ESDGuns.com ESD Generator Verification Equipment Package

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $1,100.00 - $9,150.00

        View options

      • ESD Test Table/Bench with Coupling Planes and Grounding Cables - ESD Immunity Test Setup Diagram from IEC 61000-4-2 for ESD immunity Test Environment with Table/Bench, Coupling Planes and Grounding Cables

        ESDGuns.com ESD Test Table-Bench with Coupling Planes and Grounding Cables

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $4,750.00

      • Insulating Foil, 0.5 mm thick per IEC 61000-4-2

        ESDGuns.com ESD Guns IF Insulating Foil for ESD Compliance Testing

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $197.00

      • ESD Guns GRC-40KV-CC Ground Cable with Resistors for ESD Voltage Bleeding ESD Test Bench Setup with Ground Planes and Grounding Cables

        View options

        ESDGuns.com ESDGuns.com GRC Series Ground Cable w- 470k Ohm Resistors for ESD Voltage Bleeding

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $297.00 - $499.00

        View options

      • ESD-BR Electrostatic Charge Removal Brush

        ESDGuns.com ESD-BR Electrostatic Charge Removal Brush

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $1,495.00

      • Rent Teseq NSG 438 30kV ESD Simulator Gun with control unit and ergonomic discharge handle for ISO 10605 and MIL-STD 331 testing applications. Rent Teseq NSG 438 30kV ESD Simulator Gun

        View options

        Teseq ESD Guns Rent Teseq NSG 438 30kV ESD Simulator Gun

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $365.00 - $2,270.00

        View options

      • Rent Schloder SESD 230 30kV Handheld Battery Operated ESD Simulator

        View options

        Schloder ESD Generators Rent Schloder SESD 230 30kV Handheld Battery Operated ESD Simulator

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $276.25 - $1,772.25

        View options

      • Schaffner / Teseq NSG 435 ESD Simulator for IEC 61000-4-2 Accessory Kit supplied when renting the Teseq NSG 435 ESD Simulator Gun

        View options

        Teseq ESD Guns Schaffner - Teseq NSG 435 ESD Simulator for IEC 61000-4-2

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $245.00 - $7,750.00

        View options

      • ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification with digital display for precise electrostatic discharge testing. ESVM High Voltage Electrostatic Voltmeter displaying 8.0 kV for ESD generator voltage verification in a lab setup with digital readout.

        View options

        ESDGuns.com ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

        In Stock  In Stock
        Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

        Request Lead Time
        Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

        International
        Depending on where you’re located, we offer next day delivery. Check your status on this link

        $399.00 - $4,200.00

        View options

      Login

      Forgot your password?

      Don't have an account yet?
      Create account