Haefely PET 4000 (249997) ESD Calibration Set for IEC-EN 61000-4-2

Description

ESD generators are calibrated according to the standard IEC/EN 61000-4-2 Ed 2.0. The Haefely PET 4000 ESD Current Target Calibration Set allows the user to take measurements conforming to the new 4GHz requirement in accordance with IEC 61000-4-2 Ed. 2.0.

Measurement of individual impulse parameters is performed using a special coaxial current shunt. This has a nominal impedance of 2 Ohms. Because ESD events can be generated as high as 120A, attenuators are required to reduce the impulse-voltage level so it can be displayed on commercial oscilloscopes. An oscilloscope with minimum 2GHz bandwidth is required to properly display the ESD impulse.

Haefely PET 4000 (249997) Includes:

  • ESD target 2 Ohm / 4GHz
  • One 20dB / 18GHz attenuator (additional 20dB attenuator optionally, ordering number 0780841)
  • Coaxial cable 1 meter
  • User manual & test certificate

    Haefely PET 4000 (249997) ESD Calibration Set for IEC-EN 61000-4-2

    Product form

    In Stock  In Stock
    Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.

    Request Lead Time
    Equipment comes and goes everyday, we aren't automated for this website, contact us for status.

    International
    Depending on where you’re located, we offer next day delivery. Check your status on this link

    $3,750.00

      Ask & Learn

      Previous answers and questions posted below

      Learn by asking questions, practicing, and getting guidance

      Ask Now

      Description

      ESD generators are calibrated according to the standard IEC/EN 61000-4-2 Ed 2.0. The Haefely PET 4000 ESD Current Target Calibration Set allows the user to take measurements conforming to the new 4GHz requirement in accordance with IEC 61000-4-2 Ed. 2.0.

      Measurement of individual impulse parameters is performed using a special coaxial current shunt. This has a nominal impedance of 2 Ohms. Because ESD events can be generated as high as 120A, attenuators are required to reduce the impulse-voltage level so it can be displayed on commercial oscilloscopes. An oscilloscope with minimum 2GHz bandwidth is required to properly display the ESD impulse.

      Haefely PET 4000 (249997) Includes:

      • ESD target 2 Ohm / 4GHz
      • One 20dB / 18GHz attenuator (additional 20dB attenuator optionally, ordering number 0780841)
      • Coaxial cable 1 meter
      • User manual & test certificate

        Login

        Forgot your password?

        Don't have an account yet?
        Create account