In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
50mm Insulation Block Set for ISO 10605
Ideally suited for the test set-up of table-top equipment for automotive ESD immunity testing per ISO 10605 the Insulation Block Set for ISO 10605 contain pieces 50 mm thick in accordance to the standard. Made of clean polyacrylonitrile with a relative dielectric permittivity of 3.9, surface resistivity of 1014 Ω and a dissipation factor of 0.01.
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Yearly calibrations are important to keep your ESD generator in good working order, maintaining accurate discharges and a consistent output waveform, as well as extend the life of your test instrument.
ESDGuns.com provides rental and calibration packages up to 50% off standard pricing. This keeps your test operation up and running at all times and maintaining a strong quality process.
Processing Calibrations Online:
Register or Login
Process your order through this or another calibration product page
An RMA form will be e-mailed after order submission
Track progress in your online account
Please submit a web request or call us now to inquiry about a rental-calibration package.
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Yearly calibrations are important to keep your ESD generator in good working order, maintaining accurate discharges and a consistent output waveform, as well as extend the life of your test instrument.
ESDGuns.com provides rental and calibration packages up to 50% off standard pricing. This keeps your test operation up and running at all times and maintaining a strong quality process.
Processing Calibrations Online:
Register or Login
Process your order through this or another calibration product page
An RMA form will be e-mailed after order submission
Track progress in your online account
Please submit a web request or call us now to inquiry about a rental-calibration package.
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Ideal for use with ESD Guns CST2 Current Target
Suitable for use with any ESD calibration target
Designed per IEC 61000-4-2 and ISO 10605
Insertion Loss: ≤ 0.3 dB up to 4 GHz
Reflection: < -30 dB up to 1 GHz, < -20 dB up to 4 GHz
N-Type Connector Standard
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
ESDGuns.com CST Current Sensing Transducer for ESD Generator Tip Verification allows the user to take measurements conforming to the requirements of the most recent version of the IEC 61000-4-2 compliance standard up to 4GHz.
ESDGuns.com CST Features:
Wideband up to 4GHz
< ± 0.5 dB up to 1GHz
< ± 1.2 dB up to 4GHz
0.5A/V transfer impedance, ±1% (with a 20dB attenuator, 5A/V)
Gold plating surface
Excellent voltage linearity up to 30kV
Meets EN/IEC61000-4-2 V2009, ISO 10605 V2008, GB/T17626.2
Input Resistance 2.08 Ohm (±1%) (2.00 Ohm when match with 50 Ohm load)
Voltage Non-linearity <2% up to 20kV, < 5% up to ± 30kV
ESDGuns.com CST Includes:
CST ESD Current Target
30dB Precision Attenuator
RG400 Coaxial Cable N to SMA
PRP Portable Reference Plane 17" by 13"
Traceable Calibration Certificate
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The CST1 ESD calibration target is one of few 1 Ohm targets on the market available to purchase and measure the current waveform from your ESD generator according to ANSI C63, MIL, and a few other niche test standards.
ESD Guns CST1 Includes:
CST1 Current Target
20 or 30dB Precision Attenuator
RG400 Coaxial Cable N to SMA
Hard Carrying Case
Traceable Calibration Certificate
Hardware and Nut Driver
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
The ESD Guns CST2 ESD Target Current Sensing Transducer is a cost-effective solution that allows the user to take measurements conforming to the requirements of the most recent version of the IEC 61000-4-2 compliance standard up to 4GHz.
ESD Guns CST2 Features:
Meets MIL-STD-461G CS118 as well as IEC 61000-4-2 and almost every other ESD test standard
Input Resistance 2.08 Ohm (±1%) (2.00 Ohm when matched with 50 Ohm load)
Wideband up to 4GHz
< ± 0.5 dB up to 1GHz
< ± 1.2 dB up to 4GHz
0.5A/V transfer impedance, ±1% (with a 20dB attenuator, 5A/V)
Voltage Non-linearity <2% up to 20kV, < 5% up to ± 30kV
ESD Guns CST2 Includes:
CST2 2 Ohm ESD Current Target
20dB or 30dB Precision Attenuator
RG400 Coaxial Cable N to SMA
SMA to BNC Adapter
Traceable Calibration Certificate
User Manual
Hardware and Nut Driver
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
We have been building custom wood tables for customers since the beginning and just getting around to posing some images.
Inquire with your requirement and we will get you a quote.
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
**If a formal quote is required please export the web page and send through your requisitioning system. We no longer generate formal quotes for orders under $500**
Suitable for the test set-up of table-top equipment for ESD immunity per ISO 10605. The DM3 Insulation Support/Dissipative Mat is required for the non-chassis mounted DUT test setup, is 3 mm thick, Resistance 3.1015 Ohm/cm3.
In Stock
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Help stop ESD disturbances with the EES Meter. The EES Meter is capable of providing measurements for many various parameters, which are determined by the type of sensor connected to the meter. Below are the three sensors that the EES comes with:
ESD Events Detection
The EES Meter serves as a measuring instrument for most ESD signals. The EES Meter measures the volume of ESD events and estimates the events’ magnitude for CDM, HBM and MM models.
Electromagnetic Field Measurement
The EES Meter is to be transformed into an EMF Meter, Power Density Meter and EIRP Meter.
RF Signal Sensor
The EES Meter measures the amplitude of an RF signal.
Raw Input Resolution: 1mV(1mV-15mV): 15mV (15mV-1500mV)
Thresholds: 1-10 Volts, 10-990 Volts Raw input: 1mV and 15 mV
ESD Counter Range: 0-32,767 counts (screen count)
Electromagnetic Field Peak Range: Min: .001 V/m Max: 20.00 V/M
Power Density Meter Peak: Min: .027 nW/cm2 Max: 106.1 uW/cm2
EIRP Meter Peak: Min: .001W Max:5333 W
Antenna Factor range: -40.0 to 40 dBm
Record interval range: 1 to 360 seconds
Record average range: .1 to 360 seconds
RF Signal Sensor Unit modes: dBuV, dBm, mV
RF Signal Sensor dynamic range: Min: -55 dBm Max: 0 dBm
RF Signal Sensor Attenuation: 00 dB/20 dB
Accessories
Hardcase
SD Card
SD Adapter
3 Plug adapter
Charger
BNC M to BNC F Adapter
SMA Cable
ESD Events Sensor
RF Signal Sensor (optional)
Electromagnetic Field Sensor (optional)
USB-Manual
Request Lead Time
In Stock Monday to friday we offer next day delivery if the product is in stock and exceptions on holidays.
Request Lead Time Equipment comes and goes everyday, we aren't automated for this website, contact us for status.
International Depending on where you’re located, we offer next day delivery. Check your status on this link
Pictured is the first build to comply with edition 3 of IEC 61000-4-2, released in 2025. With customer feedback, it will likely evolve and may look different. Ground cable connection is about complete but not pictured. Order just the ground plane and stand with a pre-drilled hole for the current target, add a shelf, add a shelf with ferrite and absorber, or add an enclosure. Contact us with questions. We will offer retrofit guidance and materials if you ordered a VGP from us in the past two years, it still can be used with a tripod to get data pretty close to the fully compliant setup.
