Coupling planes build according to international, automotive and other common ESD immunity test standards, custom coupling planes also available. Standard material used is 1/16" thick aluminum, magentic, copper and other conductors available upon request.
Order Horizontal Coupling Plane Including Resistor Cable (2 x 470 kOhm resistors) online today. ESDGuns.com is the ultimate online store for ESD testing. **Please contact ESDGuns.com to see if delivery is available in your area. Shipping costs can be expensive.
$695.00
Interlocking Panels (3' by 6') 1/16" Aluminum supported by 1/2" plywood Easy access for Grounding Cables Standard size 9' X 6'Â **Please contact ESDGuns.com to see if delivery is available in your area. Shipping costs can be expensive.
$1,995.00
 VCP Vertical Coupling Plane consists of: VCP Aluminum 20" by 20" Wood Stand Ground Cable with 470k Ohm resistors for voltage bleeding
$1,475.00
ISO 10605Â appendix F describes an additional special horizontal coupling plane as a new approach. This approach is intended to produce more repeatable test results and to better correlate with vehicle level ESD tests and the real word environment in comparison especially to the HCP test specified in IEC 61000-4-2. The EMC Partner HCP-Auto allows for direct and indirect application of ESD discharges to the DUT as per the automotive test standard ISO 10605 for electrostatic immunity, also reference by manufacturer specs by Ford, GM, Toyota and more.
$3,990.00
Rthe vertical coupling plane with any ESD generator, setup in seconds on any lab bench and begin testing immediately. The indirect radiated portion of electrostatic immunity testing is required for compliance. If your product will be used in metal cabinets, next to industrial machinery or even on top of the metal counters at your corner supermarket, electric shock may cause radiated interference. VCP Vertical Coupling Plane consists of: VCP Aluminum 20" by 20" Wood Stand Ground Cable with 470k Ohm resistors for voltage bleeding
$79.00
XL VCP Vertical Coupling Plane consists of: VCP Aluminum 1.2m by 1.2m Wood Stand Ground Cable with 470k Ohm resistors for voltage bleeding
$0.00
Annex F of the actual ISO 10605, provides an additional approach for the ESD powered up test. This approach is intended to produce more repeatable test results and to better correlate with vehicle level ESD tests and the real world environment in comparison especially to the HCP test. This test is an optional test that can be selected by the users in additional to the present standard ESD powered up test as described in clause 5.3. The EM Test CSL 200 allows for direct and indirect application of ESD discharges to the DUT as per the automotive test standard ISO 10605 for electrostatic immunity, also reference by manufacturer specs by Ford, GM, Toyota and more. See Diagrams of Horizontal Coupling Plane (Pictures 2 and 3): Field Coupling Plane Field Coupling Strip Discharge islands DUT and wiring harness isolation block DUT DUT wiring harness Battery Peripheral or support equipment AN (if used) Ground reference point for battery and support equipment DUT local ground,(if required) Ground reference point for ESD Coupling Plane, ESD generator and safety ground connection 2 x 470 kΩ high voltage resistors to satety ground HCP ESD generator main uni
$0.00
