Replace bad air discharge and contact discharge tips. Unique test tips available for fast rise time and other tests.
ESD Test Tips
-
Thermo Keytek Thermo Keytek TPC-2A Contact Tip for Minizap Simulator, 0.7-1 ns Rise Time
The Keytek TPC-2A contact discharge tip is the most recent generation tip used with the Keytek Minizap MZ-15 and MZ-15/EC ESD simulators, compliant to IEC 61000-4-2, edition 2 and 3. ESDguns.com stocks replacement tips for easy ordering and replacement.
$1,850.00
-
Teseq ESD Guns Teseq INA 4418 ESD Tip with Multifunctional Banana Connector & Fast Rise Time
This versatile tip features a 4mm socket for standard laboratory banana plugs, making it suitable for a wide variety of applications. The Teseq INA 4418 tip is also supplied with a set of interchangeable contact adaptors. Teseq INA 4418 Features: 4mm banana plugs Fast Rise Time: <400 picoseconds Supplied with interchangeable contact adapters For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
$950.00
-
Teseq ESD Guns Teseq INA 4417 ESD Tip with Multifunctional Banana Connector
This versatile tip features a 4mm socket for standard laboratory banana plugs, making it suitable for a wide variety of applications. Teseq INA 4417 Features: 4mm banana plugs For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
$0.00
-
The EMC Shop ESD-ST30 High Voltage Air Discharge Tip
The 30mm sphereical tip is referenced in ISO 10605 for testing above 15kV in air discharge mode. Suitable for use for any test fun with a 4mm banana jack connector, built for use with the ESD30.
$390.00
-
Teseq ESD Guns Teseq (Schaffner) 402-972 Replacement Air Discharge Tip for NSG 435 ESD Gun
Teseq (Schaffner) 402-972 Replacement Air Discharge Tip for Teseq / Schaffner NSG 435 ESD Gun
$0.00
-
Teseq ESD Guns Teseq (Schaffner) 403-149 Replacement Contact Discharge Tip for NSG 435 ESD Gun
Teseq (Schaffner) 403-149 Replacement Air Discharge Tip for Teseq / Schaffner NSG 435 ESD Gun
$0.00
-
Teseq ESD Guns Teseq INA 4413x Remote Discharge Tip for Explosive, Airbag & Special ESD Applications
Separate the control and the discharge module for special ESD applications including explosives, ammunitions and airbags. For applications where ESD pistol needs to stay away from EUT. Consists in Banana tip, HV extension cord of 1.5 meter, ended with resistor unit and set of air and contact test finger.
$200.00 - $1,800.00
-
Teseq ESD Guns Teseq (Schaffner) INA 4415 Flexible Test Tip Set for NSG 437-NSG 438
Flexible tip set. Where the application makes access of EUT discharge point difficult. Approx. 30 cm flexible extension adapter tips. Set of 2 tips, for air discharge and contact discharge mode. The Teseq (Schaffner) INA 4415 flexible test tip set was developed specifically for testing in difficult to reach places while maintaining discharge pulse shape integrity. The set includes a pointed test tip for working in contact discharge mode and a test finger with an IEC cone shape for air discharge testing.These highly flexible tips allow the user to keep the operating and display panel of the ESD simulator in ideal viewing position at all times during the test. All of the ESD simulator’s functions are available with the tip installed. Measurements taken on an IEC or ISO compliant calibration test system reveal that, even with the additional length, the pulse data obtained for contact discharges are very similar to those achieved with standard tips. These tips may also be used with any other NSG 438 discharge network. Teseq (Schaffner) INA 4415 Features: Maintain discharge pulse shape integrity in difficult to reach places Set of two 30 cm flexible extension adapter tips For use with Teseq NSG 437 or NSG 438
$0.00
-
Teseq ESD Guns Teseq INA 4411 Fast Risetime Test Tip for NSG 437-NSG 438 ESD Gun
Real world ESD phenomena can involve fast discharge current rise times of up to 400ps. While these faster phenomena are mentioned in the equipment-level standards, the standards only specify rise times in the range of 700ps – 1ns. The Teseq INA 4411 optional tip can generate rise times of less than 400ps, allowing investigation of high frequency phenomena beyond the standards. Teseq INA 4411 Features: Rise time <400 picoseconds Investigate high frequency phenomena For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
$590.00
-
Teseq ESD Guns Teseq (Schaffner) INA 4416 Spring-loaded Contact Tip for Pinpoint Precision Testing
The Teseq INA 4416 is a spring-loaded “pogo pin” tip that has been specifically designed for connector contact testing. This tip allows delicate contacts to be precisely selected and protected from mechanical stress during testing. This tip is compliant with the discharge pulse specification in IEC 61000-4-2. Teseq (Schaffner) INA 4416 Features: Soft touch contact tip Specifically designed for connector contact testing For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
$0.00
-
Teseq ESD Guns Teseq 30mm Sphere Air Discharge Adapter
For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
$395.00
Equipment
-
ESD Simulator Guns
-
ESD Immunity Test Environment
-
Calibration Test Equipment
-
Accessories for ESD Simulators
-
PCB/IC ESD Immunity Test Systems
-
Automated ESD Test Systems
-
16 kV ESD Guns
-
Resistive Charge Cables
-
30 kV ESD Guns
-
Coupling Planes
-
Electrostatic Voltmeters
-
ESD Calibration Test Targets
-
ESD Test Tables
-
HBM / MM ESD Simulators
-
Insulating Support
-
MIL-STD-331, Munitions & Fuzes (500pF, 500/5000Ohm)
-
Rent 30kV ESD Simulators
