30 kV ESD Guns

Haefely ESD Gun - PESD 3010 Automotive Package
Fresh Traceable Calibration w/ Data...
$9,452.50 -5% $9,950.00

All specials

Viewed products

Kikusui KES4022A...
Complies with the EN/IEC61000-4-2...

Best sellers

Schaffner / Teseq NSG 435 ESD Simulator for IEC 61000-4-2
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
$590.00
ESDGuns.com GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
$179.00
Rent Keytek Minizap MZ-15/EC 15kV ESD Simulator Gun
Rentals Ship Immediately Purchase Options See: Used Keytek Minizap ESD...
$495.00
ESD Guns IF Insulating Foil for ESD Compliance Testing
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
$197.00
Haefely ONYX 16 kV ESD Generator Gun
Rental Package Includes Air and Contact Discharge Tips Output Capability...
$595.00
Teseq / Schaffner INA 405 Spare Ni-Mh Battery Pack for NSG 435 ESD Gun
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
$275.00
Teseq NSG 437 Electrostatic Discharge (ESD) Simulator Gun for GR-1089 & IEC 61000-4-2
Air- and contact-discharge to 30 kV Color touch panel control Advanced...
$895.00
Haefely ONYX 30 kV ESD Test Gun
Flexibility – enables users to meet many different test specifications...
$990.00

All best sellers

Kikusui KES4022A Electrostatic Discharge Simulator up to 30kV for IEC 61000-4-2

Schaffner / Teseq NSG 435 ESD Simulator for IEC 61000-4-2 - Electrostatic Discharge (ESD) Guns

View larger

Condition Used

Complies with the EN/IEC61000-4-2 standard
Maximum testing voltage of +/-30 kV exceeds required test levels
Easy-to-use panel design
Equipped with the programming feature (KES4022A)
Supports a wide range of electrostatic standards

More details

$7,975.00 + Shipping

Currently Being Repaired

Request Quote/More Info

Send to a friend
Send to a friend
Kikusui KES4022A Electrostatic Discharge Simulator up to 30kV for IEC 61000-4-2
Complies with the EN/IEC61000-4-2 standard
Maximum testing voltage of +/-30 kV exceeds required test levels
Easy-to-use panel design
Equipped with the programming feature (KES4022A)
Supports a wide range of electrostatic standards
Recipient :
Name of your friend ^* :
E-mail address of your friend ^* :
^* Required fields
or Cancel
Print

Data sheet

Air Discharge Voltage	0.00kV to 30.5KV
Contact Discharge Voltage	0.00kV to 30.5KV
Discharge tips	Ball and point as per IEC
Holding time	0.00kV to 30.5KV
Charge resistor	0.00kV to 30.5KV
Polarity	Positive / negative
Discharge Repetition	0.5/1/5/10/20 or 25 Hz (air); 0.5/1/5 or 10 Hz (contact);
Discharge Counter	0 to 9999
Standards Met	IEC/EN 61000-4-2, ISO 10605
Weight	8 kg

More info

Kikusui KES4021A/4022A Description:

The KES4021A/4022A ESD simulator allows you to perform immunity tests on an electrical or electronic device by simulating a direct or indirect electrostatic discharge from a charged human operator.

***Please make note the Kikusui KES4021A/4022A is a legacy model and no factory replacement or support will be available.***

Specifications:

Discharge Method: Contact discharge and Air discharge
Set Voltage: 0.00kV to 30.5KV (Guaranteed specifications: 0.50kV to 30.0kV)
Polarity: Positive and Negative
Charge Resistor: 50MΩ (combined with the discharge gun)
Discharge Interval: 0.05 / 0.1s to 99.9s
step operation: in step volage 0.01 to 30.0kV
Memory operation: Stores 20 sets of testing conditions for each operation (a total of 80 sets)
Power Supply: AC100V to 240V 50/60Hz
Discharge Cycle: 1 to 999/ Continuous