Store Info

Resources

Manufacturers

Viewed products

Best sellers

Teseq NSG 438 ESD Simulator

New

  • Teseq NSG 438 ESD Simulator Rentals
  • Air- and contact-discharge to 30 kV
  • Battery tested to 30’000 discharges at 30 kV
  • Standard Discharge Network for IEC 61000-4-2, RTCA/DO-160 and Mil-STD-461G CS 118
  • Custom Discharge Networks for ISO 10605
  • Advanced voltage-hold feature
  • Activity log
  • Compliant with a huge range of OEM and international standards
  • Built-in self-calibration

More details

$14,260.00 + Shipping

  • New
  • Used / Refurbished

New, Used & Rentals In Stock

Request Quote/More Info

Download

Data sheet

Air Discharge Voltage200 V to 30 kV
Contact Discharge Voltage200 V to 30 kV
Voltage Resolution100 Volts
Discharge tipsBall and point as per IEC and specials, exchangeable by threaded cap
Pulse networksNetwork 150 pF / 330 Ω as per IEC / EN 61000-4-2 and ISO 10605; Automotive Test Package: Optional ISO 10605 networks 330 pF / 330Ω, 150 pF / 2 kΩ and 330 pF / 2 kΩ
Charging voltage measurementkV, accuracy better than ±5% (stabilized)
Discharge detection (air-discharge only)Indicated by the kV symbol being displayed in inverse also acoustically in the ‘Single’ operating mode. Adjustable threshold level.
Holding timeAt least 5 seconds (charging voltage +5%)
Charge resistor50 MΩ
PolarityPositive / negative / automatic change
Operating modesSingle / repetitive / random (time / pulse)
DisplayLCD panel showing: charging voltage, breakdown event, polarity, air- / contact-discharge, counter / preselect counter content, network parameters, battery monitor
Discharge Repetition0.5 / 1 / 5 / 10 / 20, 25 Hz (air); 0.5 / 1 / 5 / 10 H or 20 Hz (contact)
Discharge Counter0 to 9999
Battery LifeN/A
Standards MetIEC 61000-4-2, ISO 10605 and many other automotive compliance standard from
WeightDisharge Pistol: 1.2 kg (2.6 lbs); Base Unit: 6.5 kg (14.3 lbs)
Max Output Voltage
30 kV
ParameterValue

More info

The industry workhouse, the Teseq (Schaffner) NSG 438 30kV ESD simulating gun system is easy to use with a colored touchscreen and easily interchangeable discharge networks. Ergonomic design and advanced functionality. The NSG 438 ESD simulator is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display.

Teseq NSG 438 Overview:

The NSG 438 comprehensively fulfills virtually all international standard requirements. Based on over 60 optional discharge networks, the NSG 438 can meet any of today’s automotive manufacturers’ standards in addition to these common compliance standards:

  • IEC/EN 61000-4-2
  • ISO 10605
  • EN 61000-6-1
  • EN 61000-6-2
  • RTCA/DO-160 Section 25
  • Mil-STD-461G CS118 (March 2015 Draft)
  • ITU-T K2


The simulator is simple, convenient and safe to use. The whole range of parameter settings including polarity selection, freely adjustable pulse repetition, counter functions and discharge detection is available up to the maximum discharge voltage.

The touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. Pre-programmed settings for IEC 61000-4-2 and ISO 10605 ensure that the simulator is automatically set up correctly and the appropriate discharge network is installed. The actual RC value is displayed at all times. Molded HV discharge networks in solid cases eliminate ionization and leakage current effects. Precisely tuned combinations of RC components guarantee wave shape parameters to be within tolerances. A unique activity log is included so that the types and numbers of ESD simulations can be easily scrolled through to check what has been tested and in what timeframe.

Accessories Included with the Teseq NSG 438:

  1. Carrying case with:
  2. Discharge pistol
  3. Cradle for discharge pistol
  4. High voltage base unit with built-in battery pack, mains adapter and battery charging unit (100 to 250 VAC)
  5. INA4380 Discharge network 150 pF/330 Ω for IEC 61000-4-2
  6. Air- and contact-discharge tips
  7. Grounding cable
  8. User manual (linked below)
  9. 25 mm discharge sphere

ESDguns.com is now a division of The EMC Shop

Teseq NSG 438 ESD Simulator Rentals

Accessories

20 other products in the same category: