Last ESD Target in stock with ISO...
Air- and contact-discharge to 30 kV...
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
Rentals Ship Immediately Purchase Options See: Used Keytek Minizap ESD...
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
Rental Package IncludesAir and Contact Discharge Tips Output...
Air- and contact-discharge to 30 kV Color touch panel control Advanced...
Monthly Rentals Ship Today Order Online, Easy Checkout 2 Days Free...
|Air Discharge Voltage||200 V to 30 kV|
|Contact Discharge Voltage||200 V to 30 kV|
|Voltage Resolution||100 Volt Steps|
|Discharge tips||Ball and point as per IEC and specials; interchangeable by threaded cap|
|Pulse networks||Network 150 pF / 330 Ω as per IEC / EN 61000-4-2 and ISO 10605; Automotive Package includes ISO 10605 networks 330 pF / 330Ω 150 pF / 2 kΩ and 330 pF / 2 kΩ|
|Charging voltage measurement||kV, accuracy better than ±5% (stabilized)|
|Discharge detection (air-discharge only)||Air-discharge only: indicated by the kV symbol being displayed in inverse, also acoustically in the single‘s operating mode. Threshold level on / off.|
|Holding time||At least 5 s (charging voltage ±5%)|
|Charge resistor||50 MΩ|
|Polarity||Positive, negative / automatic change|
|Operating modes||Single / repetitive, Continous|
|Display||LCD panel showing: charging voltage, breakdown event, polarity,air- / contact-discharge, counter / preselect counter content|
|Discharge Repetition||0.5 / 1 / 5 / 10 / 20 or 25 Hz (air); 0.5 / 1 / 5 / 10 or 20 Hz (contact)|
|Discharge Counter||0 to 9999|
|Standards Met||IEC 61000-4-2 and ISO 10605 (more RC networks available)|
|Weight||Discharge Pistol: cable): 1.2 kg (2.6 lbs); Base unit: 5.7 kg (12.6 lbs)|
Ergonomic design and advanced functionality. The Teseq NSG 437 Electrostatic Discharge (ESD) Simulator Gun for GR-1089 & IEC 61000-4-2 is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display.
Teseq NSG 437 comprehensively fulfills virtually all international standard requirements. Based on over 60 optional discharge networks, the NSG 437 can meet any of today’s automotive manufacturers’ standards.
The simulator is simple, convenient and safe to use. The whole range of parameter settings including polarity selection, freely adjustable pulse repetition, counter functions and discharge detection is available up to the maximum discharge voltage.
The color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. Pre-programmed settings for IEC 61000-4-2 and ISO 10605 ensure that the simulator is automatically set up correctly and the appropriate discharge network is installed. The actual RC value is displayed at all times. Molded HV discharge networks in solid cases eliminate ionization and leakage current effects. Precisely tuned combinations of RC components guarantee wave shape parameters to be within tolerances. A unique activity log is included so that the types and numbers of ESD simulations can be easily scrolled through to check what has been tested and in what timeframe.