Send Enquiry For Teseq (Schaffner) 402-972 Replacement Air Discharge Tip for NSG 435 ESD Gun
Teseq (Schaffner) 402-972 Replacement Air Discharge Tip for NSG 435 ESD Gun
- Standard Air Discharge Tip for Teseq / Schaffner NSG 435 ESD Gun
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total
Best sellers
-
ESDGuns.com GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
$199.00 -
Schaffner / Teseq NSG 435 ESD Simulator for IEC 61000-4-2
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
$590.00 -
ESD Guns IF Insulating Foil for ESD Compliance Testing
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
$197.00 -
3ctest EDS MAX20 ESD Gun for IEC 61000-4-2
Programmable discharge voltage 500 V to 20 kV Pre-programmed IEC/EN...
$475.00 -
Haefely ONYX 16 kV ESD Generator Gun
Rental Package IncludesAir and Contact Discharge Tips Output...
$595.00 -
Rent Schloder SESD 230 30kV Handheld Battery Operated ESD Simulator
Lightweight and ergonomical Pre-programmed Test Levels per IEC 61000-4-2...
$695.00 -
ESD16 16.5kV ESD Simulator for IEC/EN 61000-4-2
Meets IEC/EN 61000-4-2 test settings Battery or mains operation...
$7,975.00 -
Teseq / Schaffner INA 405 Ni-Mh Battery Pack Refurbishment for NSG 435 ESD Gun
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
$275.00
ESD Test Tips
Replace bad air discharge and contact discharge tips. Unique test tips available for fast rise time and other tests.
ESD Test Tips There are 10 products.
Showing 1 - 10 of 10 items
Teseq (Schaffner) 402-972 Replacement Air Discharge Tip for NSG 435 ESD Gun
Typically In Stock- Standard Air Discharge Tip for Teseq / Schaffner NSG 435 ESD Gun
Teseq INA 4411 Fast Risetime Test Tip for NSG 437/NSG 438 ESD Gun
Typically In Stock- Rise time <400 picoseconds
- Investigate high frequency phenomena
- For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
Teseq INA 4417 ESD Tip with Multifunctional Banana Connector
Typically In Stock- 4mm banana plugs
- For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
Teseq (Schaffner) INA 4415 Flexible Test Tip Set for NSG 437/NSG 438
- Maintain discharge pulse shape integrity in difficult to reach places
- Set of two 30 cm flexible extension adapter tips
- For use with Teseq NSG 437 or NSG 438
$395.00Typically In StockTeseq (Schaffner) 403-149 Replacement Contact Discharge Tip for NSG 435 ESD Gun
Typically In Stock- Standard Contact Discharge Tip for Teseq / Schaffner NSG 435 ESD Gun
Teseq (Schaffner) INA 4416 Spring-loaded Contact Tip for Pinpoint Precision Testing
Typical Lead Time 2 - 4 Weeks- Soft touch contact tip
- Specifically designed for connector contact testing
- For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
Teseq INA 4418 ESD Tip with Multifunctional Banana Connector & Fast Rise Time
Typical Lead Time 2 - 4 Weeks- 4mm banana plugs
- Fast Rise Time: <400 picoseconds
- Supplied with interchangeable contact adapters
- For use with Teseq NSG 437 or Teseq NSG 438 ESD simulator systems
Teseq INA 4413x Remote Discharge Tip for Explosive, Airbag & Special ESD Applications
Typically In Stock- Extension Allows to Isolate DUT & Discharge Point from User & Pistol
- No additional programming or hardware configuration
- Safely discharge to dangerous EUT such as Explosive or Airbags
Thermo Keytek TPC-2A Contact Tip for Minizap Simulator, 0.7-1 ns Rise Time
- Meets IEC 61000-4-2 ESD test and debugging
- Comes with a fresh Calibration and Data Points (can be done with your model Minizap)
$1,850.00Typically In StockThermo Keytek TPA-2 Air Tip for Minizap Simulator
- Meets IEC 61000-4-2 ESD test and debugging
- Comes with a fresh Calibration and Data Points (can be done with your model Minizap)
$250.00Typically In Stock
Showing 1 - 10 of 10 items