No products
Viewed products
0.20 - 30kV Output Voltage Discharge...
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
Rentals Ship Immediately Purchase Options See: Used Keytek Minizap ESD...
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
Rental Package IncludesAir and Contact Discharge Tips Output...
Air- and contact-discharge to 30 kV Color touch panel control Advanced...
Air- and Contact- Discharge: 1000 Volts - 20kV ±5% Rise time: 0.6-1ns RC...
Used
Air Discharge Voltage | 0.20 - 30.0kV |
Contact Discharge Voltage | 0.20 - 30.0kV |
Discharge tips | air and contact |
Holding time | more than 2 seconds |
Charge resistor | 10MΩ (53MΩ for combination with TC-815D(F) discharge gun) |
Polarity | Positive or negative |
Operating modes | IEC Severity Level, Manual, Sweep, Program |
Display | LCD with back light |
Discharge Repetition | 0.05 - 600.0 seconds |
Discharge Counter | 1 - 60000 times |
Battery Life | N/A |
Standards Met | EN/IEC61000-4-2 |
Dimensions | (W)300 × (H)160 × (D)430 mm |
Weight | 9.5 kg's (21 Lb's) |
The Noiseken ESS-200AX 30kV ESD electrostatic simulator was a very popular unit but has been discontinued by the manufacturer. Current models are the ESS-B3011 and ESS-S3011. The ESS-200AX is still suitable for precompliance testing to IEC/EN 61000-4-2 or general test and debugging for ESD immunity.