> Equipment>ESD Simulator Guns>Electro-Tech Systems 930D Electrostatic Discharge Simulator / ESD Generator

Resources

Store Info

Manufacturers

Viewed products

Best sellers

All best sellers

Electro-Tech Systems 930D Electrostatic Discharge Simulator / ESD Generator

Electro-Tech Systems 930D Electrostatic Discharge Simulator / ESD Generator View larger

New

  • Voltage range: ±100 to ±30kV
  • Plug-in R/C networks
  • HBM 1500 ohm/100 pf for Mil Std. 883E testing
  • 330 ohm/150 pf (IEC)
  • Custom networks available
  • Contact & air discharge
  • Remote discharge capability
  • Optional E & H-Field Probes
  • Optional IEC Test Target
  • Test in accordance with North American and European ESD simulation standards.

More details

Request Quote

Request Quote/More Info

Data sheet

Air Discharge Voltage ±100 - 26,000V (30,000 Volt Option)
Contact Discharge Voltage ±100 - 26,000V (30,000 Volt Option)
Voltage ResolutionLO: ±1V (100-6000Volts); HI: ±10V
Pulse networksHBM: 100pf Cap Module & 1500Ω Resistor Module; IEC: 150pf/330Ω Module & 0Ω Resistor Module; Automotive: 330pf/2000Ω Module & 0Ω Resistor Module; MM: 200pf Cap Module & 0Ω Resistor Module; MIL STDs: 500, 5000pf Cap Modules 0, 500, 5000Ω Resistor Modules
Operating modesAuto mode, discharges 0-9, 0.3-10seconcs
DisplayVoltage Level: 4½-digit LED, 0.5” (12mm) numeric; AUTO mode: 1-digit LED, 0.5 (12mm) numeric
Standards MetHBM (100pf/1500Ω); IEC 61000-4-2 (150pf/330Ω) MM (200pf/0Ω); MIL STDs 331, 1512, 1576 (500pf/0, 500 & 5kΩ)

More info

The Electro-Tech Systems 930D Electrostatic Discharge Simulator generates ESD discharge pulses from ±100 to ±30kV. Available RC Networks include a 1.5k ohm/100pf Human Body Model (HBM) Network, 330 ohm/150 pf IEC Network or choose from a variety of automotive, electronic, medical or military networks.

The ETS 930D consists of a control unit and a discharge (gun) unit connected by a detachable 12-ft cable. The control unit houses the low voltage power supply with LED status indicators, system timing electronics, .5" LED voltage display and controls for the AUTO MODE event counter and high voltage power supply. In addition, a duplicate set of Charge/Discharge controls are provided for remote operation.

The discharge unit (gun) contains the high voltage power supply and high voltage relay plus plug-in resistor and capacitor networks. It incorporates high voltage ON/OFF, MANUAL/ AUTO and RELAY/AIR discharge controls along with LED status indicators. A ¼-20 threaded hole enables the gun to be mounted to a tripod.

The system has four modes of operation: AUTO COUNT, FREE RUN, MANUAL and AIR DISCHARGE. Air Discharge and Manual operations are controlled by the switches on the gun. The complete system is housed in an ABS carrying case.

Electro-Tech Systems 930D:

  • Voltage range: ±100 to ±30kV
  • Plug-in R/C networks
  • HBM 1500 ohm/100 pf for Mil Std. 883E testing
  • 330 ohm/150 pf (IEC)
  • Custom networks available
  • Contact & air discharge
  • Remote discharge capability
  • Optional E & H-Field Probes
  • Optional IEC Test Target
  • Test in accordance with North American and European ESD simulation standards.

30 other products in the same category: