Store Info



Viewed products

Best sellers

Haefely PET 4000 (249997) ESD Calibration Set for IEC/EN 61000-4-2

Haefely 249997 ESD Calibration Set for IEC/EN 61000-4-2 - View larger


  • According to IEC 61000-4-2 Ed. 2.0
  • 4GHz bandwidth
  • Up to 30kV / 120A ESD-impulse

More details

  • New

Request Quote/More Info

Data sheet

Variation of Insertion Loss+/- 0.5 dB up to 1 GHz, +/- 1.2 dB up to 4 GHz,
Input/Shunt Resistance2 Ohm
Pulse Amplitude30kV / 120A Maximum
Bandwidth4 GHz

More info

ESD generators are calibrated according to the standard IEC/EN 61000-4-2 Ed 2.0. The Haefely PET 4000 ESD Current Target Calibration Set allows the user to take measurements conforming to the new 4GHz requirement in accordance with IEC 61000-4-2 Ed. 2.0.

Measurement of individual impulse parameters is performed using a special coaxial current shunt. This has a nominal impedance of 2 Ohms. Because ESD events can be generated as high as 120A, attenuators are required to reduce the impulse-voltage level so it can be displayed on commercial oscilloscopes. An oscilloscope with minimum 2GHz bandwidth is required to properly display the ESD impulse.

Haefely PET 4000 (249997) Includes:

  • ESD target 2 Ohm / 4GHz
  • One 20dB / 18GHz attenuator (additional 20dB attenuator optionally, ordering number 0780841)
  • Coaxial cable 1 meter
  • User manual & test certificate


9 other products in the same category: