Top sellers

View:
Grid
List

Showing 101 - 110 of 119 items

Quick view
3ctest EDS 30T Electrostatic Discharge ESD Generator
- Air- and Contact- Discharge: 1000-30,000 Volts ±5%
- Resolution: 100 Volts
- Hold Time: >5 seconds
- Frequency Repetition: Single/0.2/0.2/0.5/1/2/5/10/20 Hz
- Standards Met: Bellcore GR-1089-Core, IEC/EN 61325, IEC/EN 61000-6-1 and 6-2, ISO 10605, ITU-TK.20, GB/T 17626.2 and more...
- Integrated sensor to monitor temperature and humidity
- Rise Time: 0.8 ns ±25% (0.6 to 1 ns)
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For 3ctest EDS 30T Electrostatic Discharge ESD Generator

3ctest EDS 30T Electrostatic Discharge ESD Generator
Air- and Contact- Discharge: 1000-30,000 Volts ±5%
Resolution: 100 Volts
Hold Time: >5 seconds
Frequency Repetition: Single/0.2/0.2/0.5/1/2/5/10/20 Hz
Standards Met: Bellcore GR-1089-Core, IEC/EN 61325, IEC/EN 61000-6-1 and 6-2, ISO 10605, ITU-TK.20, GB/T 17626.2 and more...
Integrated sensor to monitor temperature and humidity
Rise Time: 0.8 ns ±25% (0.6 to 1 ns)
Name Email Phone Subject Message or
Add to Compare
Quick view
3M 753 Electrostatic Discharge Simulator for Human Body Model (HBM) & Machine Model (MM)
- Discharge Models:
  Human Body Model (HBM):
  Capacitance: 100 pF ±10%
  Resistance: 1500 Ohms ±1%
  Machine Model (MM):
  Capacitance = 200 pF ±10%
  No Resistor
- Output Voltage: 15 to 5,000 V
- Display Resolution:
  1 V at or under 800 V
  10 V at or above 1000 V
- Display Accuracy: 3% of total reading
- Stability: 1% after 10 minutes of settling
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For 3M 753 Electrostatic Discharge Simulator for Human Body Model (HBM) & Machine Model (MM)

3M 753 Electrostatic Discharge Simulator for Human Body Model (HBM) & Machine Model (MM)
Discharge Models:
Human Body Model (HBM):
Capacitance: 100 pF ±10%
Resistance: 1500 Ohms ±1%
Machine Model (MM):
Capacitance = 200 pF ±10%
No Resistor
Output Voltage: 15 to 5,000 V
Display Resolution:
1 V at or under 800 V
10 V at or above 1000 V
Display Accuracy: 3% of total reading
Stability: 1% after 10 minutes of settling
Name Email Phone Subject Message or
Add to Compare
Quick view
Noiseken ESS-S3011 Advanced 30kV ESD Simulator System
- Built-in self check function with ESD tip terminal to verify discharge relay operation
- Indicator light confirm discharge (Red to Green)
- Easily interchangeable Resistance/Capacitance modules
- LED light to focus and/or illuminate discharging areas
Request Quote
More
1 Unit in Stock
Request Quote/More Info
Send Enquiry For Noiseken ESS-S3011 Advanced 30kV ESD Simulator System

Noiseken ESS-S3011 Advanced 30kV ESD Simulator System
Built-in self check function with ESD tip terminal to verify discharge relay operation
Indicator light confirm discharge (Red to Green)
Easily interchangeable Resistance/Capacitance modules
LED light to focus and/or illuminate discharging areas
Name Email Phone Subject Message or
Add to Compare
Quick view
$990.00 New
Teseq INA 4569 Discharge Network 200 pF / 0 Ohm for NSG 437/438
- Capacitance: 200 pF
- Resistance: 0 Ohm
- Used to replicate machine model ESD events
- Compatible with Teseq NSG 437 and NSG 438 Models
$990.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For Teseq INA 4569 Discharge Network 200 pF / 0 Ohm for NSG 437/438

Teseq INA 4569 Discharge Network 200 pF / 0 Ohm for NSG 437/438
Capacitance: 200 pF
Resistance: 0 Ohm
Used to replicate machine model ESD events
Compatible with Teseq NSG 437 and NSG 438 Models
Name Email Phone Subject Message or
Add to Compare
Quick view
CST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration
- Ideal for use with ESD Guns CST2 Current Target
- Suitable for use with any ESD calibration target
- Designed per IEC 61000-4-2 and ISO 10605
- Insertion Loss: ≤ 0.3 dB up to 4 GHz
- Reflection: < -30 dB up to 1 GHz, < -20 dB up to 4 GHz
- N-Type Connector Standard
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For CST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration

CST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration
Ideal for use with ESD Guns CST2 Current Target
Suitable for use with any ESD calibration target
Designed per IEC 61000-4-2 and ISO 10605
Insertion Loss: ≤ 0.3 dB up to 4 GHz
Reflection: < -30 dB up to 1 GHz, < -20 dB up to 4 GHz
N-Type Connector Standard
Name Email Phone Subject Message or
Add to Compare
Quick view
Singer/Sensitive Research ESH Electrostatic Voltmeter up to 10kV
- Quick and easy setup
- Note this unit only works in the lower voltage allowing for measurement up to 10kV
- Fresh NIST Calibration (Partial for lower voltage range)
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Singer/Sensitive Research ESH Electrostatic Voltmeter up to 10kV

Singer/Sensitive Research ESH Electrostatic Voltmeter up to 10kV
Quick and easy setup
Note this unit only works in the lower voltage allowing for measurement up to 10kV
Fresh NIST Calibration (Partial for lower voltage range)
Name Email Phone Subject Message or
Add to Compare
Quick view
$990.00
EM Test RCN30 250-1500 RC Network
RC Network for ESD NX30 - 250pF/1500Ω
$990.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For EM Test RCN30 250-1500 RC Network

EM Test RCN30 250-1500 RC Network
RC Network for ESD NX30 - 250pF/1500Ω
Name Email Phone Subject Message or
Add to Compare
Quick view
Haefely 2490207 100pF/1500Ohm RC Module for ONYX
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For Haefely 2490207 100pF/1500Ohm RC Module for ONYX

Haefely 2490207 100pF/1500Ohm RC Module for ONYX
Name Email Phone Subject Message or
Add to Compare
Quick view
$1,010.00 New
Teseq INA 4591 Discharge Network 250 pF / 500 Ohm
- Capacitance: 250 pF
- Resistance: 500 Ohm
- Compatible with Teseq NSG 437 and NSG 438 Models
$1,010.00
Add to cart More
Typically In Stock
Request Quote/More Info
Send Enquiry For Teseq INA 4591 Discharge Network 250 pF / 500 Ohm

Teseq INA 4591 Discharge Network 250 pF / 500 Ohm
Capacitance: 250 pF
Resistance: 500 Ohm
Compatible with Teseq NSG 437 and NSG 438 Models
Name Email Phone Subject Message or
Add to Compare
Quick view
ESD Generator Verification Equipment Package
- Complete solution for ESD Generator verification (oscilloscope required)
  4 GHz ESD Current Target Chain with Calibration
  High-voltage meter rated to 100kV
  Vertical calibration plane for coaxial current target
  2 GHz Digital Storage Oscilloscope
Request Quote
More
Typically In Stock
Request Quote/More Info
Send Enquiry For ESD Generator Verification Equipment Package

ESD Generator Verification Equipment Package
Complete solution for ESD Generator verification (oscilloscope required)
4 GHz ESD Current Target Chain with Calibration
High-voltage meter rated to 100kV
Vertical calibration plane for coaxial current target
2 GHz Digital Storage Oscilloscope
Name Email Phone Subject Message or
Add to Compare

Showing 101 - 110 of 119 items

Name	Provider	What it does	Expiry	Allow (Check all)
Language Selector	PrestaShop	Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language. Cookie we use to offer you the possibility to switch the language of our contents. If cookie is disabled you'll see the site in the original language.	30 days	Allow
Currency Selection	PrestaShop	Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown. Cookie which makes possible to choose the currency you would like. If disabled the store default currency will be shown.	30 days	Allow

Featured ESD Gun

61000-4-2 Test Environment

Featured Calibrator

Categories

Top sellers

Send Enquiry For 3ctest EDS 30T Electrostatic Discharge ESD Generator

3ctest EDS 30T Electrostatic Discharge ESD Generator

Send Enquiry For 3M 753 Electrostatic Discharge Simulator for Human Body Model (HBM) & Machine Model (MM)

3M 753 Electrostatic Discharge Simulator for Human Body Model (HBM) & Machine Model (MM)

Send Enquiry For Noiseken ESS-S3011 Advanced 30kV ESD Simulator System

Noiseken ESS-S3011 Advanced 30kV ESD Simulator System

Send Enquiry For Teseq INA 4569 Discharge Network 200 pF / 0 Ohm for NSG 437/438

Teseq INA 4569 Discharge Network 200 pF / 0 Ohm for NSG 437/438

Send Enquiry For CST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration

CST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration

Send Enquiry For Singer/Sensitive Research ESH Electrostatic Voltmeter up to 10kV

Singer/Sensitive Research ESH Electrostatic Voltmeter up to 10kV

Send Enquiry For EM Test RCN30 250-1500 RC Network

EM Test RCN30 250-1500 RC Network

Send Enquiry For Haefely 2490207 100pF/1500Ohm RC Module for ONYX

Haefely 2490207 100pF/1500Ohm RC Module for ONYX

Send Enquiry For Teseq INA 4591 Discharge Network 250 pF / 500 Ohm

Teseq INA 4591 Discharge Network 250 pF / 500 Ohm

Send Enquiry For ESD Generator Verification Equipment Package

ESD Generator Verification Equipment Package