Viewed products
Intuitive operation Portable &...
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
Rentals Ship Immediately Purchase Options See: Used Keytek Minizap ESD...
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
Rental Package IncludesAir and Contact Discharge Tips Output...
Air- and contact-discharge to 30 kV Color touch panel control Advanced...
Air- and Contact- Discharge: 1000 Volts - 20kV ±5% Rise time: 0.6-1ns RC...
Used
Availability date:
Air Discharge Voltage | 0.50kV to 30kV |
Contact Discharge Voltage | 0.50kV to 30kV |
Discharge tips | Air & Contact |
Pulse networks | 150 pF capacitor unit and 330 Ohm and more |
Holding time | 0.05 / 0.1s to 99.9s |
Discharge Repetition | 1 to 999 / Continuous |
Battery Life | AC Power Supply |
Standards Met | IEC 61000-4-2 |
The test voltage levels of the MZ-30 are more than sufficient for compliance to required IEC standard level 4 (15 kV) levels. Essentially a design tool, it allows you to identify the conditions where your product begins to degrade or malfunction (limit value), prior to production, and thus is also ideal for testing to category- or companydriven quality standards. The operation panel has keys and a rotary knob, which allow you to directly set test levels specified by the IEC standard. These controls facilitate adjustment for standardcompliance tests and other various settings.
In addition to the standard 150 pF capacitor unit and 330O discharge resistor, a variety of optional components are available including a 330 pF capacitor unit and 2kO discharge resistor. The MZ-30 also supports the seven discharge current waveforms prescribed for the waveform calibration method laid down in a target compliant with IEC61000-4-2 Editions 1. In addition, it was designed to suppress waveform ringing to improve waveform quality.
The MZ-30 also supports the seven discharge current waveforms prescribed for the waveform calibration method laid down in a target compliant with IEC61000-4-2 Editions 1. In addition, it was designed to suppress waveform ringing to improve waveform quality.