Store Info



Best sellers

Portable ESD Verification Target & Reference Plane Available for Rent at

Released 11.12.2015

Calibration and verification of ESD generator is called out in most current electrostatic discharge compliance standards including IEC/EN 61000-4-2, ISO 10605, RTCA/DO-160 and the upcoming Mil-STD 461G CS118. Calibration intervals can be left to the user’s discretion, with some quality departments requiring a daily verification in effort to maximize repeatability. will begin offering this portable setup for rental as customer requests have increased from the industry’s awareness and quality concerns for consistent discharges during ESD immunity testing. identified an economical solution for customers that rent ESD simulators for pre-compliance testing and evaluation. Most standards call for a reference plane of 1.2 x 1.2 meters, making it unconventional to rent. The Portable Reference Plane offered by measures 17” by 13” and is as efficient with near equivalent results to the marge larger plane required for compliance. While oscilloscopes have advanced in the reduction of external noise and interference, ESD immunity standards have loosened on the isolation requirements, with previous versions requiring the use of a faraday cage as analog and FFT scopes were more susceptible to outside noise.

The CST current sensing transducer is pre-installed into the reference plane requiring minimal setup to an oscilloscope. How-to-videos for ESD generator calibration are available shortening the learning curve and allowing users to begin pre-compliance evaluation in virtually no time. Inquire today at for more information on the portable ESD target and Reference Plane setup.

About is a distributor of electrostatic discharge testing equipment, accessories and hardware for ESD compliance to international standards IEC 61000-4-2, ISO 10605, RTCA/DO-160, Mil-STD-461G CS 118 and more. Locations in California and New Jersey allow for servicing, including calibrations to ISO 17025 and repairs, to be completed in a timely and cost efficient manner. The only web store that offers a side-by-side comparison tool as well as pricing and online ordering and rental reservations.

Rent CST-PRP Current Sensing Target/Portable Reference Plane for ESD Generator Calibration

Order Now

CST-PRP Current Sensing Target/Portable Reference Plane

Rent CST-PRP Current Sensing Target/Portable Reference Plane$395/month Rent Now


  • 9 kV Contact / 16.5 kV Air
  • Ideal for CE Marking
  • Meets IEC 61000-4-2
  • Meets ANSI C63.16
  • Actual Voltage Monitor