Store Info

Resources

Manufacturers

Specials

Best sellers

Product Release: Ground Cables for ESD Voltage Bleeding

Released 08.20.2015 - Roseville, CA

ESDGuns.com is proud to announce it's first US manufactured product, the GRC Series grounding cables with 470k Ohm resistors for ESD voltage bleeding during IEC compliance and pre-compliance test and evaluation. The indirect discharge part of ESD immunity test uses two planes, known as the horizontal coupling plane (HCP) and the vertical coupling plane (VCP) and coupled to the ground reference plane (GRP). The HCP remains in place under the EUT during the direct tests, the VCP to be placed at a 10 cm distance from the EUT.

Using high quality components and built in the USA, ESDGuns.com is the only stocking manufacturer of these ESD cables/leads, making them immediately available at an economic price.

Features:

  •          Ideal for voltage bleeding during Indirect ESD Immunity Testing
  •          Meets IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.
  •          20kV or 40kV High Voltage Cable (typically rated to 150 degrees C)
  •          Carbon Comp Allen Bradley or Metal Oxide Resistors (5% tolerance)
  •          1.5 Meters (5 Feet) in Length
  •          Made in USA

Models:

GRC-40KV-CC is the top of the line cable using carbon composition resistors, suitable for ESD testing to the voltage levels required for RTCA/DO-160, ISO 10605, MIL-STD-461G CS118 and others requiring a 30kV ESD generator. Carbon composition resistors will survive several years of high frequency and long test sequences. These cables are recommended for laboratories whom perform precompliance ESD testing to the aforementioned standards on a regular basis.

GRC-20KV-CC is a grounding resistive cable suitable for long term and high frequency testing to IEC 61000-4-2, IEC 60601 and other commercial ESD compliance standards. 

GRC-40KV-MO use metal oxide resistors suitable for all types of ESD testing, with a slightly shorter life expectance than the carbon comp resistors, these cables are offered at half the price as the -CC models.

GRC-20KV-MO are ideal for customers renting a 15kV or 16kV ESD simulator for precompliance evaluation or during the design phase requiring intermittent use of an ESD generator.

About ESDGuns.com
Established in 2014, ESDGuns.com is a distributor of electrostatic discharge testing equipment, accessories and hardware for ESD compliance to international standards IEC 61000-4-2, ISO 10605, RTCA/DO-160, Mil-STD-461G CS 118 and more. Locations in California and New Jersey allow for servicing, including calibrations to ISO 17025 and repairs, to be completed in a timely and cost efficient manner. The only web store that offers a side-by-side comparison tool as well as pricing and online ordering and rental reservations.

 

ESDGuns.com GRC Series

ESDGuns.com GRC Series Ground Cable with Resistors for ESD Voltage Bleeding

SPECIAL PRICING

GRC-40KV-CC: $199 (Reg. $279)

GRC-20KV-CC: $149 (Reg $209)

GRC-40KV-MO: $139 (Reg. $199)

GRC-20KV-MO: $99 (Red. $149)