Haefely PESD 3010 Electrostatic Discharge (ESD) Simulator - Generator Gun

SKU:

Availability: In stock

Regular price $9,950.00

Best price for ESD debugging to 30,000 Volts
Unique integrated self test function
Contact discharge current flow detection
Remote trigger input
Slow repetition rates

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Category:

The Haefely PESD 3010 Electrostatic Discharge (ESD) Simulator / Generator Gun has been replaced by the Haefely ONYX 30 kV ESD Test Generator. The Haefely PESD 3010 is still suitable for most ESD immunity test applications and can be rented or purchased at an economical price compared to current model 30 kV ESD simulators. Please note quantities are limited as parts are no longer available and units must be scrapped once functionality fails.

Haefely ONYX 30 kV Description:

Bringing dissimilar insulation materials together and then parting them creates electrostatic charges. The resultant electrostatic discharge (ESD) can cause failures in electronic circuits. There are two principal methods of discharge: Air discharge and contact discharge. Contact discharge is the preferred test method because test results are more reproducible.

There are many standards which require discharge component (Resistor & Capacitor) values other than those described in the IEC/EN 61000-4-2 standard. With PESD 3010 it is possible to meet these requirements due to the changeable R&C modules.

PESD 3010 features a unique NO CONTACT detection circuit. During contact discharge tests, PESD 3010 continuously monitors if ESD pulses are really discharged to the EUT (Equipment under Test). In case of no contact to the EUT, the operator receives a warning message in the LCD display. This prevents the user from potentially wrong test results.

PESD 3010 has a highly ergonomic design. This includes a firm handle that insures safe and comfortable operation under any circumstances, and dedicated, large conventional pushbuttons for easy and convenient setting of all test parameters.

For long running tests, a screw socket on the bottom enables to mount the gun on a standard tripod.

Accessory Kit for Haefely ONYX 30 kV:

Test tip air discharge
Test tip contact discharge
2 rechargeable battery packs
Ground cable
Battery charger unit includes mains adaptor set
R/C module 150 pF/330 Ω according to IEC 61000-4-2
Quick start guide
User Manual
Calibration certificate

Pulse Amplitude
Polarity	Positive & Negative
Operating Modes	Single & Continuous
Max Output Voltage	Positive & Negative
Length
Width
Weight	Gun: 1.5 kg; Controller: 1.5 kg
Height
Input/Shunt Resistance
Holding Time
Display
Discharge Repetition	Single/0.1/0.2/1/2/5/10/20 Hz
Discharge Detection Air Discharge
Discharge Counter	1 - 9999
Dimensions	Gun: 10 x 21 x 29 cm; Controller : 17 x 10 x 28 cm
Contact Discharge Voltage	1 – 30kV
Charging Voltage Measurement
Battery Life
Bandwidth
Discharge Tips
Air Discharge Voltage	1 – 30kV
Voltage Resolution	100 volt steps
Variation of Insertion Loss
Standards Met	IEC/EN 61000-4-2; ISO/TR 10605 for Automotive Testing; MIL 464 system requirements; MIL 331B Fuse & Fuse components; MIL 1542B space system facilities
Radiation Rating
Pulse Networks	150 pF / 330 Ohm