Resources

Store Info

Manufacturers

Specials

Best sellers

ESD Simulator Guns

ESD Simulation Guns for IEC 61000-4-2, ISO 10605 and other standards to simulate electrostatic discharge phenomena. Pre-certify, troubleshoot or perform any other verification of your product having an ESD gun readily available. With a wide range of simulators up to 30kV, as well as Discharge Networks to meet military and automotive standards - ...

ESD Simulation Guns for IEC 61000-4-2, ISO 10605 and other standards to simulate electrostatic discharge phenomena. Pre-certify, troubleshoot or perform any other verification of your product having an ESD gun readily available. With a wide range of simulators up to 30kV, as well as Discharge Networks to meet military and automotive standards - learn, acquire and receive the best support with this common EMC test.

More

ESD Simulator Guns There are 43 products.

Subcategories

  • 16 kV ESD Guns

    Browse ESD simulators rated to the required voltage levels of IEC 61000-4-2 (8 kV contact discharge and 15 kV air discharge). Most current model 16 kV ESD simulator guns are handheld, light and portable, with some extra voltage capability to allow you to further test and verify the electrostatic withstand immunity of your product. These units are suitable for CE Marking, RTCA/DO-160 and are ready for Mil-STD 461 CS118.

  • 30 kV ESD Guns

    Browse 30kV ESD simulators for ISO 10605, Mil-STD 883 and other high voltage electrostatic immunity test parameters. Current model 30 kV ESD simulators have easy to access and replace discharge networks to allow for specialized ESD capacitance and resistance testing.

  • RC Modules / Discharge Networks

    Discharge Networks or RC Modules (Specific Resistance and Capacitance values) are required for general standards like IEC 61000-4-2, SAE J113 and industry specific standards like ISO 10605. Resistance is referred to in ohms (Ω), Capacitance is referred to in picofarad (pF or "puff"). The most commonly used Discharge Network is for IEC 61000-4-2 and ISO 10605, expressed as 330pF/330Ω. There are over 50 combinations of Resistance & Capacitance depending on the standards and the applicable electronics.

  • Accessories for ESD Simulators

    Batteries, adapters, ground cables, special test trigger fingers and other accessories for ESD guns. 

  • HBM / MM ESD Simulators

    Human Body Model (HBM) and Machine Model (MM) ESD simulators for semiconductor and microprocessor testing to electrostatic immunity. Compliance standards include IEC 60749-26, Mil-STD-883, ANSI/ESD STM5.1-2001, ANSI/ESD STM5.2-1999, JEDEC EIA/JESD22, GB/T17626 IEC61000-4-2 and IEC 61000-4-2 (HMM - Human Metal Model). Additional options for Charged Device (CDM) ESD testing available.

per page
Showing 11 - 20 of 43 items
  • This unis is obsolete but supported by ESDguns.com

    Typically In Stock
    Request Quote/More Info
  • Quick view
    $695.00 Rental - 1 Month
    • Most ergonomic design
    • Light weight (870g)
    • Interchangeable discharge tips
    • Interchangeable R/C networks
    • LiFePO4 power booster to perform long duration tests
    • Library of standard test routines
    • Test voltage measurement and control
    • Various test routines for testing and evaluation
    $695.00
    In Stock
    Request Quote/More Info
  • Quick view
    $895.00 Rental - 1 Month
    • Rentals supplied with ESD3000DM1 module for standard IEC testing
    • Very high accuracy and pulse repetition
    • High Quality / Rugged Design
    • Most Modular System Available
    • Upgrade over time from 16kV to 30kV
    • Additional Discharge Networks Available For Rent (Inquire)
    $895.00
    Typically In Stock
    Request Quote/More Info
    • ±5 Volts to 8 kV (Adjustable down to 1 Volt Steps)
    • 1-5 Channel Discharge Selection
    • Tests Most Device Configurations
    • Meets Human Body (HBM) Model Mil-STD-883E, ANSI/ESD/JEDEC JS-001-2010 (formerly ANSI/ESD-STM5.1 & JESD A114B)
    • Meets Machine Model (MM) ANSI/ESDA/JEDEC JS-001-2010, ANSI/ESDA STM 5.2, JEDEC 22-A11
    • Custom Resistance/Capacitance Networks Available
    • Programmed Test Voltages
    In Stock
    Request Quote/More Info
    • 10 Volts to 2 kV (1 Volt Steps)
    • Meets most Human Body Model (HBM) Compliance Standards
    • Meets most Machine Model (MM) Compliance Standards
    • Probe stand, test fixture and test leads meeting many device packages
    • Narrow pitch DUT can be tested in semi-automatic manner
    • Each probe has a coaxial interface with an external measuring device
    • External trigger input and output terminals are provided
    Request Quote/More Info
    • “Pre-checking function” taking the confirmable test into the account
    • “Discharge Detecting Function” to realize the air-discharge confirmation.
    • “Lightest Discharge Gun in the market” to lighten the continual operation
    • White LED Irradiator to facilitate the visualization of the discharging area.
    • One-touch exchange of gun head and CR unit realized
    Request Quote/More Info
    • Fully compliant HMM (IEC 61000-4-2 like) and HBM pods  
    • 2 pin connection, via wafer probes, to any device in a package, die, or on a wafer 
    • Thermo Scientific™ Scimitar™ Unified Software Platform to provide superior application performance  
    • Pre and Post V/I curve trace measurements for comparative failure analysis using a Keithley 2400 PSU 

    Typically In Stock
    Request Quote/More Info
  • Quick view
    $395.00 Rental - 1 Month
    • Standards Met:
      • IEC 61340-3-1
      • JEDEC 22-A114
      • Mil-STD-750D
    • Capacitance/Resistance: 100pF / 1500ohm
    • Voltage range (CD) Contact Discharge: +/- 0.2kV up to 8kV
    • Voltage range (AD) Air Discharge: None
    $395.00
    Typically In Stock
    Request Quote/More Info
    • Used Unit includes:
      • 100 Day Warranty
      • NIST Traceable Calibration w/ Data
      • Battery Powered ESD Simulator built in 150pF/330Ohm Network
      • Base Station for Charging or AC Operation
      • Air Discharge Tip
      • Contact Discharge Tip
      • Grounding Cable
      • User Manual
    • Try before you buy, Rent-to-Own and Leasing options available
    Request Quote/More Info
    • Air- and Contact- Discharge: 1000-30,000 Volts ±5%
    • Resolution: 100 Volts
    • Hold Time: >5 seconds
    • Frequency Repetition: Single/0.2/0.2/0.5/1/2/5/10/20 Hz
    • Standards Met: Bellcore GR-1089-Core, IEC/EN 61325, IEC/EN 61000-6-1 and 6-2, ISO 10605, ITU-TK.20, GB/T 17626.2 and more...
    • Integrated sensor to monitor temperature and humidity
    • Rise Time: 0.8 ns ±25% (0.6 to 1 ns)
    Typically In Stock
    Request Quote/More Info
Showing 11 - 20 of 43 items