Resources

Store Info

Manufacturers

Best sellers

ESD Immunity Test Environment

Test setups, or environments, are required to when performing ESD immunity testing to isolate the Equipment Under Test (EUT) and protect the technician from voltage exposure. The IEC 61000-4-2 test standards details specific requirements for table-top (large and small) and floor standing equipment. Components of the ESD test enviornment can be p...

Test setups, or environments, are required to when performing ESD immunity testing to isolate the Equipment Under Test (EUT) and protect the technician from voltage exposure. The IEC 61000-4-2 test standards details specific requirements for table-top (large and small) and floor standing equipment. Components of the ESD test enviornment can be purchased independently for post-installation and custom ESD testing.

More

ESD Immunity Test Environment There are 12 products.

Subcategories

  • ESD Test Tables

    ESDGuns.com is the only supplier of all ESD testing tables, components and accessories to help you meet IEC 61000-4-2, CE Mark and other electrostatic discharge compliance standards. An ESD test table typically includes a ground plane, hoizontal and vertical coupling planes, two grounding cables with 470 kOhm resistors and insulation material.

  • Coupling Planes for Electrostatic Immunity Testing
  • Resistive Cables

    The IEC 61000-4-2 ESD immunity standards requires a cable with 470 kΩ bleeder resistors, shall be connected to the ground resistance plane (GRP) to both horizontal and coupling planes. Ungrounded EUT also require a resistive cable grounding the EUT to the horizontal coupling plane.

    *The presence of the cable with the bleeder resistors can influence the test results of some equipment. In case of dispute, a test with the cable disconnected during the ESD pulse takes precedence over the test with the cable installed during the test, provided that the charge has sufficiently decayed between the successive discharges

  • Associated Items

    Purchase associated items and replacement parts for your ESD test environment. 

per page
Showing 11 - 12 of 12 items
Showing 11 - 12 of 12 items