Send Enquiry For Haefely PET 4000 (249997) ESD Calibration Set for IEC/EN 61000-4-2
Haefely PET 4000 (249997) ESD Calibration Set for IEC/EN 61000-4-2
- According to IEC 61000-4-2 Ed. 2.0
- 4GHz bandwidth
- Up to 30kV / 120A ESD-impulse
Cart 0 Product Products (empty)
No products
TBD Shipping
$0.00 Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
Total shipping TBD
Total
Calibration Test Equipment
Best sellers
-
Schaffner / Teseq NSG 435 ESD Simulator for IEC 61000-4-2
Programmable discharge voltage 200 V to 16.5 kV Stabilized charging...
$590.00 -
ESDGuns.com GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
Ideal for voltage bleeding to Ground Plane during Indirect ESD Immunity...
$199.00 -
Rent Keytek Minizap MZ-15/EC 15kV ESD Simulator Gun
Rentals Ship Immediately Purchase Options See: Used Keytek Minizap ESD...
$495.00 -
ESD Guns IF Insulating Foil for ESD Compliance Testing
Suitable for EN/IEC 61000-4-2 ESD immunity compliance testing...
$197.00 -
Teseq / Schaffner INA 405 Ni-Mh Battery Pack Refurbishment for NSG 435 ESD Gun
ESD Guns can refurbish your existing INA 405 battery pack. Expected...
$275.00 -
Haefely ONYX 16 kV ESD Generator Gun
Rental Package IncludesAir and Contact Discharge Tips Output...
$595.00 -
Teseq NSG 437 Electrostatic Discharge (ESD) Simulator Gun for GR-1089 & IEC 61000-4-2
Air- and contact-discharge to 30 kV Color touch panel control Advanced...
$895.00 -
3ctest EDS 20H Hand-held 20kV Electrostatic Discharge ESD Simulator
Air- and Contact- Discharge: 1000 Volts - 20kV ±5% Rise time: 0.6-1ns RC...
$476.00
Calibration Test Equipment More
Several standards such as an ANSI C63.16 require ESD simulator calibration, specifying test equipment. Measuring high voltage static electricity is a simple and generally hazardous free task that can be performed in most test laboratories performing electrostatic discharge and immunity testing. Self calibrate or verify your ESD guns, generators,...
Several standards such as an ANSI C63.16 require ESD simulator calibration, specifying test equipment. Measuring high voltage static electricity is a simple and generally hazardous free task that can be performed in most test laboratories performing electrostatic discharge and immunity testing. Self calibrate or verify your ESD guns, generators, pistols and tips with calibration test equipment offered by ESDGuns.com.
Calibration Test Equipment There are 25 products.
Subcategories
ESD Calibration Test Targets
Coaxial calibration targets for measuring, testing and calibrating the ESD pulse from your electrostatic discharge gun. Target, 20 dB attenuator and RF coaxial cable offered seperately or as calibrated systems to ensure accurate test results. ESDGuns.com representatives will help set up your complete measuring path from the target to the attenuator up to the high quality coax cable.
Electrostatic Voltmeters
Verify the voltage coming from the tip of your ESD pistols with an electrostatic voltmeter. These high-impedance, high voltage measuring instruments are used in ESD simulator verification and calibration. The new ESVM digital meter has high accuracy to 1 Volt and is ideal for meeting compliance standards IEC 61000-4-2, ISO 10605 and more.
Oscilloscopes for ESD Calibration
High speed oscilloscopes for verification and calibration the waveforms generated by your ESD simulator.
Calibration Setup Accessories
Rent, buy or lease ESD simulator calibration test equipment. ESDGuns.com is a global supplier of electrostatic immunity compliance equipment to meet IEC 61000-4-2, ANSI C63.16 and more.
ESD Calibration & Repair Services
Process a calibration or repair request online, receive an RMA form and send your unit. A few short steps to get this task underway, rentals available to minimize downtime. ESDguns.com can repair and calibrate ESD generators from most manufacturers including but not limited to Teseq, EM Test, Keytek, Haefely, Noiseken and 3ctest.
Haefely PET 4000 (249997) ESD Calibration Set for IEC/EN 61000-4-2
Typically In Stock- According to IEC 61000-4-2 Ed. 2.0
- 4GHz bandwidth
- Up to 30kV / 120A ESD-impulse
Teseq MD 101 Coaxial Measurement Target per IEC 61000-4-2
Typically In Stock- Target for precise ESD pulse measurements
- Very small insertion loss variation
- Precise gold plated construction
- Requires attenuator and RF cable
- Designed per IEC 61000-4-2 (1995)
EMC-Partner Veri-V Calibrator for Air Discharge Voltage
Typically In Stock- Impedance: 20 GΩ // 3pF
- Standard: IEC 61000-4-2 up to 25kV
- Plug into any standard O-scope via 50 ohm coax
Teseq MD 103 ESD Pulse Calibration Set for ESD Waveshape Verification
- Target for precise ESD pulse measurements
- Very small insertion loss variation
- Precise gold plated construction
- Includes target, attenuator and cable
- ISO 17025 calibration certificate for the whole set
$940.001 Unit in StockCST-ADAP Target Adapter Line for ESD Current Target Insertion Loss Measurement & Calibration
Typically In Stock- Ideal for use with ESD Guns CST2 Current Target
- Suitable for use with any ESD calibration target
- Designed per IEC 61000-4-2 and ISO 10605
- Insertion Loss: ≤ 0.3 dB up to 4 GHz
- Reflection: < -30 dB up to 1 GHz, < -20 dB up to 4 GHz
- N-Type Connector Standard
VGP Mobile Vertical Ground Plane Setup for ESD Current Target
- Industrial strength wheels and mounted handles allow for easy placement
- Pre drilled holes for easy installation of any ESD target
$1,975.00In StockBrandenburg 149-01 High Voltage Meter for Calibration of ESD Simulators
Typically In Stock- 4½ digit LCD display.
- High input resistance (10GΩ).
- Up to 40kV or 60kV direct measuring
- Battery operation for portable use (9V).
- Display is Voltage Co-efficient compensated
- Recorder output for monitoring.
- 40kV models supplied with hand held probe.
- Rugged construction.
ESD Generator Verification Equipment Package
Typically In Stock- Complete solution for ESD Generator verification (oscilloscope required)
- 4 GHz ESD Current Target Chain with Calibration
- High-voltage meter rated to 100kV
- Vertical calibration plane for coaxial current target
- 2 GHz Digital Storage Oscilloscope
- Complete solution for ESD Generator verification (oscilloscope required)
CST2 ESD Current Target with ISO 17025 Calibration
- Last ESD Target in stock with ISO 17025 Accredited Calibration
- Meets MIL-STD-461G CS118 as well as IEC 61000-4-2 and most every other ESD test standard
- Includes 20dB attenuator
- Input Resistance 2.08 Ohm (±1%) (2.00 Ohm when match with 50 Ohm load)
- Wideband up to 4GHz
- 0.5A/V transfer impedance, ±1% (with a 20dB attenuator, 5A/V)
$4,375.00Sold!Rohde & Schwarz RTE1202 Digital Oscilloscope 2 GHz, 4 channels
Typically In Stock- Built in ESD Software for compliance and calibration
- Highest sampling rate of 5 Gsample/s and deepest memory of 200 Msample for accurate acquisition of long signal sequences
- Acquisition rate of more than one million waveforms/s for finding signal faults quickly
- Extremely low-noise frontends and 16-bit vertical resolution in high definition mode for precise results
