> Equipment>ESD Simulator Guns>30 kV ESD Guns>EM Test ESD 30N ESD Simulator/Generator

Resources

Store Info

Manufacturers

Viewed products

Best sellers

All best sellers

EM Test ESD 30N ESD Simulator/Generator

Sale! Refurbished - EM Test ESD 30N 30 kV ESD Simulator/Generator View larger

Refurbished

  • This unit is obsolete but supported by ESDguns.com
  • Used Units occasionally available
  • 90 Day Warranty
  • ISO 17025 Calibration Available

More details

$8,750.00

1 Unit In Stock

Request Quote/More Info

Download

Datasheet: EM Test ESD 30N

Download (1.25M)

Data sheet

Air Discharge Voltage200V - 30,000V ± 5%
Contact Discharge Voltage200V - 30,000V ± 5%
Voltage Resolution100 Volt Steps
Discharge tipsPoint and ball type
Holding timeMore than 5 seconds
PolarityPositive, negative; selectable
Operating modesSingle pulse, multiple pulses, pre-select counter
DisplayGraphic LCD display
Discharge Repetitionup to 20 Hz
Discharge Counter0 - 9,999
Battery LifeApprox. 1 hour operation; Buffer battery is automatically recharged when connected to AC mains supply
Standards MetEN/IEC 61000-4-2 Ed.2
Weight1.25kg (discharge pistol); 5.1kg (control unit)

More info

Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls.

ESD 30N is an ESD tester to simulate ESD pulses at higher voltages up to 30kV in both air and contact discharge mode. It therefore satisifies requirements exceeding the EN/IEC 61000-4-2 test levels and complies to automotive test applications.

The EM Test ESD 30N electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognised by the controls and indicated in the display.

The EM Test Dito ESD 30N ESD Simulator/Generator is either mains supplied or supplied by a DC source. Even battery powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the ESD 30N separating the sensitive computer from the test set-up and to avoid ground loops.

EM Test ESD 30N Features:

  • Test voltage up to 30kV for air and contact discharge
  • Discharges up to 20Hz
  • Easy-to-change R/C-networks and tips
  • Bleed-Off function
  • Measurement of temperature and humidity
  • AC mains supply and DC supply
  • Battery operated
  • External trigger function
  • USB-interface
  • Control and analyzing-software for Windows Vista and Windows 7
  • Optional fiber optic link between ESD 30N and computer (USB port)

Accessories

29 other products in the same category: